Abstract:Optical fiber structures for bending sensing have attracted extensive attention in recent years with their unique advantages. In this article, innovative C-shaped-core long-period fiber gratings (C-LPFGs) with two resonant peaks are proposed and experimentally tested. This special fiber microstructure is achieved by methods of CO2-laser polishing and oxyhydrogen-flame heating. During the process of heating, the core at polished area micro-bends to the surface of the structure due to the surface tension effect, which forms a “C”-shaped core. Each microbending Section of core results in partial energy leaking into the cladding to excite the cladding modes. As the number of periods increases, stronger effective refractive index modulation forms multiple resonant peaks. According to the experimental results, sensors with 17 periods represent excellent contrast and repeatability of two resonant peaks. The bending sensitivity of the proposed structure achieves −24.01/−21.3 nm/m−1 at 0° and −4.88/−10.17 nm/m−1 at 90° of Dip <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$_{1/2}$ </tex-math></inline-formula> . Furthermore, the temperature sensitivity of both dips is 64/33 pm/°C, and the total length of the sensor is only 0.85 cm. With considerable bending sensitivity, the compact sensor possesses latent potential in fields of dual-parameter measurement in the future.

All fiber compact bending sensor with high sensitivity based on a multimode fiber embedded chirped long-period grating.

Highly Sensitive Bending Sensor Based on C-Shaped-Core Long-Period Fiber Gratings

Concave-lens-like Long-Period Fiber Grating Bidirectional High-Sensitivity Bending Sensor.

Highly Sensitive Vector Bending Sensor Based on an Embedded Multimode D-shaped LPFG.

Vector Bending Sensor Based on Chirped Long-Period Grating with Off-Axis Micro-Helix Taper

Highly Sensitive Curvature Sensor Based on Long Period Fiber Grating with Alternately Splicing Multiple Single/Multimode Structure

Compact Bending Sensor Based on a Fiber Bragg Grating in an Abrupt Biconical Taper.

High Sensitive Bend Sensor Based on A Fiber Bragg Grating and Ellipsoid Structure

Bend Vector Sensor Based on Long Period Fiber Grating Inscribed in Mismatched Twin Core Fiber

High-sensitivity Bending Vector Sensor Based on Γ-Shaped Long-Period Fiber Grating

A Highly Sensitive Curvature Sensor Based on Omega-Shaped Long-Period Fiber Grating

Dual-dip Long-Period Fiber Gratings for Directional Bending Measurement

High sensitivity curvature sensor based on the long period fiber grating inscribed in the two-mode fiber

All-fiber Sensor Based on Few-Mode Fiber Offset Splicing Structure Cascaded with Long-Period Fiber Grating for Curvature and Acoustic Measurement

Highly Sensitive Bending Sensor Based on Multicore Optical Fiber with Diagonal Cores Reflector at the Fiber Tip

Micro-bending Sensing Based on Single-Mode Fiber Spliced Multimode Fiber Bragg Grating Structure

A chirped long period fiber grating sensor based on micro-helix taper

Sensitivity-enhanced two-dimensional bending sensor based on single-mode fiber measurement

Highly Sensitive Bending Sensor Based on Multimode–multimode–coreoffset Fiber Structure

Fiber Bending Sensor with Turning Point in a Multimode Fiber Peanut-Like Structure

Compact Fiber Bending Sensor Based On Superimposed Gratings