Abstract:Background With the current rapid economic growth, demands for energy are progressively increasing. Energy shortages have attracted significant attention due to the shrinking availability of non-renewable resources. Therefore, thermal energy storage is one of the solutions that lead to saving of fossil fuels and make systems more cost-effective by the storage of wasted thermal energy. In particular, the application of phase change materials (PCMs) is considered as an effective and efficient approach to thermal energy storage because of the high latent heat storage capacity at small temperature intervals. Nevertheless, leakage problems and low thermal conductivity limit the practical applications of PCMs. Therefore, form-stable phase change materials with high thermal conductivity are urgently needed. Results A novel form-stable composite phase change material was prepared by incorporating PEG into waste sawdust with 5% EG. In the composites, PEG served as a phase change material, while waste sawdust acted as a carrier matrix. EG was added to help increase the thermal conductivity of the composites. The melting temperature of CPCMs-4 with 5% EG was found to be 58.6 °C with a phase change enthalpy of 145.3 kJ/kg, while the solidifying temperature was 48.5 °C with a phase change enthalpy of 131.4 kJ/kg. The thermal conductivity of CPCMs-4 with 5% EG increased by 23.8% compared with that of CPCMs-4. Moreover, no obvious changes in melting, solidifying temperature, or latent heat after 200 heating–cooling cycles were detected. The supercooling extent of CPCMs-4 with 5% EG decreased by 19.2% compared with PEG. The volume change properties and wettability properties of CPCMs-4 with 5% EG are suitable for thermal energy in terms of practical application. Conclusions The prepared composites have excellent thermal and form-stable properties and they can be recognized as potential candidates for thermal energy storage as form-stable composite phase change materials. Using simple impregnation techniques with waste sawdust as a supporting material, this study demonstrates an innovative technology for practically and markedly enhancing the adsorption capacity of phase change materials.

Expanded Graphite – Paraffin Composite Phase Change Materials: Effect of Particle Size on the Composite Structure and Properties

Preparation and Properties of Paraffin /LDPE /OMMT /graphite Phase Change Composite for Thermal Energy Storage

Preparation and Thermal Characterization of Expanded Graphite/paraffin Composite Phase Change Material

Effects of Pore Structure and Pore Size of Expanded Graphite on the Properties of Paraffin Wax/Expanded Graphite Composite Phase Change Materials

Tetradecanol/expanded graphite composite form-stable phase change material for thermal energy storage

Preparation and characterization of paraffin/expanded graphite composite phase change materials with high thermal conductivity

Thermal and Photo/electro-Thermal Conversion Characteristics of High Energy Storage Density Expanded Graphite/polyethylene Glycol Shaped Composite Phase Change Materials

The Effect of Expanded Graphite Content on the Thermal Properties of Fatty Acid Composite Materials for Thermal Energy Storage

Expanded Graphite/Paraffin/Silicone Rubber As High Temperature Form-Stabilized Phase Change Materials For Thermal Energy Storage And Thermal Interface Materials

Effect of Expanded Graphite Size on Performances of Modified CaCl2·6H2O Phase Change Material for Cold Energy Storage

Effects of Graphite Microstructure Evolution on the Anisotropic Thermal Conductivity of Expanded Graphite/paraffin Phase Change Materials and Their Thermal Energy Storage Performance

Improvement of thermal cycle stability of paraffin/expanded graphite composite phase change materials and its application in thermal management

Preparation and Thermal Performance of Palmitic Acid/Expanded Graphite Composite Phase Change Materials

Structure and Thermal Properties of Composite Paraffin/Expanded Graphite Phase-Change Material

Expanded Graphite for Thermal Conductivity and Reliability Enhancement and Supercooling Decrease of MgCl2⋅6H2O Phase Change Material

Thermal and Mechanical Properties of Expanded Graphite/Paraffin Gypsum-Based Composite Material Reinforced by Carbon Fiber

Structure, Characterization and Thermal Properties of the Form-Stable Paraffin/High-Density Polyethylene/Expanded Graphite/Epoxy Resin Composite PCMs for Thermal Energy Storage

Preparation of PE-EPDM Based Phase Change Materials with Great Mechanical Property, Thermal Conductivity and Photo-Thermal Performance

Preparation and Thermal Properties of Low-Temperature Composite Phase-Change Materials Based on a Binary Eutectic Mixture with Expanded Graphite: Effect of Particle Size and Mass Fraction

Preparation and characterization of phase change erythritol/expanded graphite@Ag composite materials for thermal energy storage

Enhanced thermal conductivity of waste sawdust-based composite phase change materials with expanded graphite for thermal energy storage