Abstract:Fiber-reinforced biological soft tissues are often modeled as anisotropic hyperelastic materials. Four strain invariants can be used to define a strain energy function for soft tissues reinforced with a single fiber family: two isotropic invariants I 1 , I 2 and two anisotropic invariants I 4 , I 5 . Invariant I 5 is often omitted in the strain energy functions to simplify the problem mathematically. In this study, the implications of using only I 4 or the use of both anisotropic invariants I 4 , I 5 in the numerical modeling of soft tissues were analyzed. A simple modification to the Holzapfel–Gasser–Ogden (HGO) model is proposed by adding a term that contains invariant I 5 . Material parameters were calculated by fitting the models with experimental data of uniaxial traction in the tibialis anterior tendon tissue of rats. General analytical solutions for the simple load scenarios were obtained. Such solutions are taken as a reference point to measure the precision of the numerical results obtained in the finite element simulations. The main differences between the models were observed in the shear behavior. The proposed model predicts three different shear responses (two responses with fiber reinforcement and one isotropic response), while the HGO model predicts two equal isotropic responses and only one with fiber reinforcement. Two sets of simple shear experimental data on a fiber-reinforced elastomer material were used to verify the shear stress prediction of the models. The experimental data show that the three shear behaviors are different; thus, the HGO model offers a limited description of the shear behavior. Furthermore, analytical solutions and experimental data suggest that invariant I 5 is related to the elastic energy of the fibers when the material is subjected to shear in a direction parallel to the fibers. The models for non-homogeneous deformations were also compared. For this comparison, an irregular geometry was implemented in ABAQUS, and the traction and shear conditions were simulated by changing the fiber inclination. The most critical difference was found when the shear was parallel to the direction of the fiber and the minor difference when the fiber was at 45° to the load force.

A Compressible Anisotropic Hyperelastic Model with I5 and I7 Strain Invariants.

Heart Composite Material Model for Stress-Strain Analysis

Role of anisotropic invariants in numerically modeling soft biological tissues as transversely isotropic hyperelastic materials: A comparative study

A Micro-Structure Based Constitutive Model for Anisotropic Stress–strain Behaviors of Artery Tissues

A Generalized, Computationally Versatile Plasticity Model Framework - Part I: Theory and Verification Focusing on Tension‒compression Asymmetry

A Review on Material Models for Isotropic Hyperelasticity

A composites-based hyperelastic constitutive model for soft tissue with application to the human annulus fibrosus

An Anisotropic Hyper-Visco-pseudo-elastic Model and Explicit Stress Solutions for Fabric Reinforced Rubber Composites

Numerical modeling of fluid-structure interaction in arteries with anisotropic polyconvex hyperelastic and anisotropic viscoelastic material models at finite strains

Improved Carroll's hyperelastic model considering compressibility and its finite element implementation

An anisotropic hyperelastic constitutive model considering shear-tension coupling for 2-dimensional woven fabrics

An Anisotropic Hyperelastic Constitutive Model with Fiber-Matrix Shear Interaction for the Human Annulus Fibrosus

At least three invariants are necessary to model the mechanical response of incompressible, transversely isotropic materials

A Nonlinear Elastic Model for Compressible Aluminum Alloys with Finite Element Implementation

Plane stress finite element modelling of arbitrary compressible hyperelastic materials

A consistent transversely-isotropic hyper-viscoelastic model: Finite element implementation and mechanical characterization of biological tissues

Comparison behavior of two compressible isotropic hyperelastic models in framework of a coupled axial stretch to simple shear test

An orthotropic viscoelastic model for the passive myocardium: continuum basis and numerical treatment

Anisotropic Mechanics of Cellular Substrate under Finite Deformation

An Anisotropic Constitutive Relationship by a Series of 8 Chain Models

An in silico-based review on anisotropic hyperelastic constitutive models for soft biological tissues