Abstract:Metal ion coordinated GO/PMMA composites have been prepared by melt method. The interfacial interaction between the nanofiller and the polymer matrix is significantly increased due to the coordination bonding. As a result, the mechanical and thermal properties of the composites are highly improved. To study the property variation with the change of metal ions and preparation methods, two different metal ions (Cu(II) and Fe(III)) were added into the GO/PMMA system, respectively, and the composites were prepared by two different methods-the direct-melt method and the master-batch method. Fourier transform infrared spectroscopy (FTIR), Raman spectra, X-ray diffraction (XRD), scanning electron microscopy (SEM), tensile test, and thermogravimetic analysis (TGA) were performed to study the structures and properties of the composites. The FTIR results showed that GO and PMMA are successfully bridged via coordination bonding, for the characteristic peaks showed obvious blue shifts. Raman spectra indicated that coordination causes no extra defect to the GO sheets. SEM images showed that the GO sheets could be homogeneously dispersed in PMMA through master-batch method, while a poor dispersion through direct-melt method. From the tensile test results, it could be seen that the composites prepared by master-batch method had a better mechanical performance than those prepared by direct-melt method because of the different dispersion states. Fe(III)-coordinated composites have better mechanical performance than Cu(II)-coordinated composites do, due to the higher valence state of iron ions. The Young's modulus and tensile strength of Fe(III)-0.5 wt% GO/PMMA composite are 29.6% and 31.8%, respectively, higher than those of the composite with only GO, and 75.0% and 35.7%, respectively, higher than those of neat PMMA. The temperature of maximum weight loss of Fe(III)-0.5 wt% GO/PMMA is 26 degrees C higher than that of GO/PMMA, and 82 degrees C higher than that of neat PMMA. This metal ion coordination method is efficient and simple, and can easily bridge nanofillers and polymer matrixes containing polar groups. This approach opens up a new strategy for improving the performance of many kinds of nanocomposites.

Preparation of GO/PMMA Nanocomposites with Significantly Increased Properties through Metal Ion Coordination

GO/PVA Nanocomposites with Significantly Enhanced Mechanical Properties Through Metal Ion Coordination

The structural, mechanical, optical and dielectric properties of aminated PMMA-Ag-GO nanocomposite for coatings

Improved Physical, thermal, and conductivity strength of ternary nanocomposite films of PVDF/PMMA/GO NPs for electrical applications

Recent progress on the metal-organic frameworks decorated graphene oxide (MOFs-GO) nano-building application for epoxy coating mechanical-thermal/flame-retardant and anti-corrosion features improvement

PMMA-grafted graphene nanoplatelets to reinforce the mechanical and thermal properties of PMMA composites

Electrical and mechanical properties of PMMA/reduced graphene oxide nanocomposites prepared via in situ polymerization

Preparation of Cu/OMMT/LLDPE Nanocomposites and Synergistic Effect Study of Two Different Nano Materials in Polymer Matrix

Preparation of Poly(methyl Methacrylate)/ultrafine CaCO3 Composite Particles by In-Situ Dispersion Polymerization

PMMA-, PAN-, and Acrylic-Based Polymer Nanocomposites

Preparation of Functionalized Graphene by Simultaneous Reduction and Surface Modification and Its Polymethyl Methacrylate Composites Through Latex Technology and Melt Blending

Improved Mechanical Properties of Graphene Oxide/Poly(Ethylene Oxide) Nanocomposites by Dynamic Interfacial Interaction of Coordination

Investigation into effect of the graphene oxide addition on the mechanical properties of the fiber metal laminates

High-performance Multi-Functional Graphene/hexagonal Boron Nitride/poly(ethylene Oxide) Nanocomposites Through Enhanced Interfacial Interaction by Coordination

Preparation of h‐BN/PMMA composites by in situ polymerization and research on their structure and properties

Bio‐inspired metal ion coordination cross‐linking synergistic strategy to enhance the interfacial properties of carbon fiber composites

Preparation of Polymer/graphene Oxide Nanocomposites by a Two-Step Strategy Composed of in Situ Polymerization and Melt Processing

Synthesis and characterization of PMMA/Al2O3 composite particles by in situ emulsion polymerization

Improved mechanical-physical performances of copper composites with reduced graphene oxide and carbonized polymer dots as multi-scale synergetic reinforcements

Synthesis and characterization of functionalized graphene oxide/polyacrylamide nanocomposites using physical adsorbing and chemical grafting and their applications in polyimide matrix

Graphene oxide as a promising nanofiller for polymer composite