Abstract:Metal ion coordinated GO/PMMA composites have been prepared by melt method. The interfacial interaction between the nanofiller and the polymer matrix is significantly increased due to the coordination bonding. As a result, the mechanical and thermal properties of the composites are highly improved. To study the property variation with the change of metal ions and preparation methods, two different metal ions (Cu(II) and Fe(III)) were added into the GO/PMMA system, respectively, and the composites were prepared by two different methods-the direct-melt method and the master-batch method. Fourier transform infrared spectroscopy (FTIR), Raman spectra, X-ray diffraction (XRD), scanning electron microscopy (SEM), tensile test, and thermogravimetic analysis (TGA) were performed to study the structures and properties of the composites. The FTIR results showed that GO and PMMA are successfully bridged via coordination bonding, for the characteristic peaks showed obvious blue shifts. Raman spectra indicated that coordination causes no extra defect to the GO sheets. SEM images showed that the GO sheets could be homogeneously dispersed in PMMA through master-batch method, while a poor dispersion through direct-melt method. From the tensile test results, it could be seen that the composites prepared by master-batch method had a better mechanical performance than those prepared by direct-melt method because of the different dispersion states. Fe(III)-coordinated composites have better mechanical performance than Cu(II)-coordinated composites do, due to the higher valence state of iron ions. The Young's modulus and tensile strength of Fe(III)-0.5 wt% GO/PMMA composite are 29.6% and 31.8%, respectively, higher than those of the composite with only GO, and 75.0% and 35.7%, respectively, higher than those of neat PMMA. The temperature of maximum weight loss of Fe(III)-0.5 wt% GO/PMMA is 26 degrees C higher than that of GO/PMMA, and 82 degrees C higher than that of neat PMMA. This metal ion coordination method is efficient and simple, and can easily bridge nanofillers and polymer matrixes containing polar groups. This approach opens up a new strategy for improving the performance of many kinds of nanocomposites.

High-performance Multi-Functional Graphene/hexagonal Boron Nitride/poly(ethylene Oxide) Nanocomposites Through Enhanced Interfacial Interaction by Coordination

Improved Mechanical Properties of Graphene Oxide/Poly(Ethylene Oxide) Nanocomposites by Dynamic Interfacial Interaction of Coordination

Self-assembled Complexes of Graphene Oxide and Oxidized Vapor-Grown Carbon Fibers for Simultaneously Enhancing the Strength and Toughness of Epoxy and Multi-Scale Carbon Fiber/epoxy Composites

GO/PVA Nanocomposites with Significantly Enhanced Mechanical Properties Through Metal Ion Coordination

Graphene Oxide/Polymer-Based Multi-scale Reinforcement Structures for Enhanced Interfacial Properties of Carbon Fiber Composites

Enhanced mechanical and tribological properties of carbon fiber/PEEK composites by hydroxylated boron nitride nanosheets and polyetherimide sizing agents

Poly( p -phenylene benzobisoxazole) Fiber/Epoxy Composites Reinforced with Carbon Nanotubes and Graphene Oxide for Enhanced Interfacial Adhesion and Mechanical Strength

Hyperbranched graphene oxide structure-based epoxy nanocomposite with simultaneous enhanced mechanical properties, thermal conductivity, and superior electrical insulation

Effects of Non-Covalent Functionalized Graphene Oxide with Hyperbranched Polyesters on Mechanical Properties and Mechanism of Epoxy Composites

Study on the Enhancement Effect of Synergy between Multi-Size Functionalized Boron Nitride and Graphene Oxide on the Thermal Properties of Phase Change Composites

Thermal enhancement by constructing ordered-orienting hybrid network with modified boron nitride, graphene and carbon nanotubes in epoxy composite coatings

Improved mechanical-physical performances of copper composites with reduced graphene oxide and carbonized polymer dots as multi-scale synergetic reinforcements

Morphological, Mechanical and Thermal Properties of Chemically Bonded Graphene Oxide Nanocomposites with Biodegradable Poly(3-Hydroxybutyrate) by Solution Intercalation

Fabrication of BaTiO3-Loaded Graphene Nanosheets-Based Polyarylene Ether Nitrile Nanocomposites with Enhanced Dielectric and Crystallization Properties

Cation π interactions trigger the oriented assembly of graphene oxide for designing high-performance carbon fiber composites

Cation–π interaction assisted facile preparation of graphene/epoxy nanocomposites with superior strength and toughness

Preparation of GO/PMMA Nanocomposites with Significantly Increased Properties through Metal Ion Coordination

Oligoimide-Mediated Graphene Oxide-Epoxy Nanocomposites with Enhanced Thermal Conductivity and Mechanical Properties

High Mechanical Performance of Layered Graphene Oxide/poly(vinyl Alcohol) Nanocomposite Films.

Multifunctional cyanate ester nanocomposites reinforced by hexagonal boron nitride after noncovalent biomimetic functionalization