Abstract:Graphite dust is an important issue for the operation and maintenance of high-temperature gas-cooled reactor (HTGR), because the transport of fission product (FP) is coupled closely with graphite dusts. For instance, vapor phase FP could condense as flowing through the steam generator (SG) and deposit on the surface of graphite dusts that are either air-borne or already deposited on SG tubes. In water ingress or loss-of-coolant accidents, these dusts may re-suspend and contribute to the source term. Despite the importance of graphite dusts in HTGRs, the transport and deposition of dust particle are far from being fully understood, neither particle-fluid nor particle-wall interactions. In this work we present a numerical study on the particle transport through upper 5 layers of SG tubes. Particularly, the particle impaction process is simulated by Finite Element Method (FEM) with adhesion and dissipation specially accounted. The FEM simulation predicts the critical adhesion velocity and restitution coefficient when rebound occurs. Then we substitute the particle impaction model into Eulerian-Lagrangian simulation of flow field and extract the deposition rate statistically. The result shows that for small particles (< 5 μm), the deposition rate is controlled by the collision rate, which is mainly determined by the interaction between turbulence and thermophoresis. The particle-vortex interaction is essentially important for the distribution of particles near wall and thus influences the deposition rate. For large particles the deposition rate is more affected by the sticking efficiency, which is simultaneously controlled by both the critical adhesion velocity and normal impaction velocity. Therefore, the deposition rate first increases then decreases with particle size and reaches maximum at about 5 μm.

Influence Factors on Moisture Absorption Process of Carbon Material in HTGR

Moisture Absorption Property and Diffusion Coefficient of Carbon Material with Boron Carbide in HTGR

Study on the Water Vapor Adsorption Characteristics of Carbon Materials in HTGR

Pore Structure and Moisture Absorption Property of Carbon Materials in HTR

STUDY ON SURFACE PORE CHARACTERISTIC AND HYDROPHILICITY OF CARBON MATERIALS IN HTGR

Study on Dehumidification of Carbon Materials Based on Thermogravimetry

Moisture Transfer Model and Simulation for Dehumidification of HTGR Core

Analysis on Moisture Transfer Behavior in Dehumidifying Process of Low Moisture Content Graphite

Study on 3D Pore Characteristics of Carbon Materials in HTGR by Micro-CT and HPMI Methods

Study on Heating Process of Dehumidifying Experiment in HTGR

Study on the Effective Diffusion Coefficient of Inert Gases in Porous Graphite Materials

Optimization of Carbonization Process in Manufacture of Fuel Elements for HTGR

Design of the Material Performance Test Apparatus for High Temperature Gas-Cooled Reactor

Graphite Dust Deposition on HTGR Steam Generator: Effects of Particle-Wall and Particle-Vortex Interactions

Study on Chemical Kinetics of Carbon Migration in Superalloys in the Non-Pure Helium Environment in High Temperature Gas Cooled Reactors

Progress Of The Study On Corrosion Behavior Of Graphite In Htgrs

A Parametric Study of Graphite Dust Deposition on High-Temperature Gas-Cooled Reactor (HTGR) Steam Generator Tube Bundles

Measurement on Effective Thermal Diffusivity and Conductivity of Pebble Bed under Vacuum Condition in High Temperature Gas-cooled Reactor

INFLUENCE OF CO AND CO2 LEVELS IN IMPURE HELIUM ON THE HIGH TEMPERATURE CORROSION BEHAVIOR OF INCONEL 617

Corrosion of High Temperature Alloys in the Primary Coolant of HTGR under Very-High Temperature Operation

Effects of porosity and temperature on oxidation behavior in air of selected nuclear graphites