Abstract:In the present work, the gasification performances of two pairs of raw and torrefied biomasses, including raw forest residue and torrefied forest residue, and raw spruce and torrefied spruce in a high-temperature entrained-flow reactor, are numerically examined and compared to each other using a Eulerian-Lagrangian CFD model developed based on OpenFOAM. Moreover, the sensitivities of three important operating parameters (excess air ratio, steam/carbon molar ratio, and biomass particle diameter), which vary in the range of practical significance, are also tested. The calculated results are analyzed both qualitatively and quantitatively by five indicators: isothermal profiles, char consumption rate, gas compositions, species yield, and carbon conversion along the reactor length. The obtained results show that torrefied biomass can increase the maximum temperature in the reactor as compared to its raw parent fuel. During gasification, CO, H-2, and CO2 are the major species in the product gas and CH4 accounts for only a very small fraction of the syngas at such a high operating temperature of 1400 degrees C. As expected, the higher the excess air ratio, the lower the H-2 yield and higher CO2 production and carbon conversion; a rise in the steam/carbon molar ratio promotes the H-2 yield but reduces the CO production; and both the H-2 and CO yields and carbon conversion decrease with increasing particle diameter. In addition, three reaction zones can be recognized from the carbon conversion along the reactor length, and such information is useful for optimal reactor design. In all cases, torrefaction consistently reduces both the H-2 production and carbon conversion as compared to its raw biomass under the same operating conditions, which suggests that torrefied biomass requires a bigger length entrained-flow gasifier or longer particle residence time to achieve the same level of conversion as that for its raw biomass.

Optimization of Carbonization Process in Manufacture of Fuel Elements for HTGR

Study on the carbonization process in the fabrication of pebble fuel elements

Study on carbonization of lignin by TG-FTIR and high-temperature carbonization reactor

Effect of Heat Treatment on Property of Phenol Resin Carbon of Pebble Fuel Element for HTGR

Studies on the dimensional and mass changes of spherical fuel element during the heat treatment

Properties and Microstructures of a Matrix Graphite for Fuel Elements of Pebble-Bed Reactors after High Temperature Purification at Different Temperatures

The electrochemical deconsolidation mechanism of graphite matrix in HTGR spherical fuel elements

Research on the Overcoating Process in the Manufacture of Spherical Fuel Elements for HTGR

Influence of Torrefaction on Biomass Gasification Performance in A High-Temperature Entrained-Flow Reactor

Design of the Material Performance Test Apparatus for High Temperature Gas-Cooled Reactor

Study on the Efficient Disintegration of HTGR Fuel Elements by Electrochemical Method

Optimization of Preparation Process and Study on the Properties and Microstructures of Nuclear Natural Graphite Powder for HTR Pebble Fuel Elements

Pulverization and Spheroidization of Natural Graphite Powder for the Matrix Graphite in High-Temperature Gas-Cooled Reactors

Key Process of Overcoating for Coated Particles in Manufacture of Fuel Elements for HTGR

Study on Dehumidification of Carbon Materials Based on Thermogravimetry

Study on the Water Vapor Adsorption Characteristics of Carbon Materials in HTGR

Effects of Reaction Temperature and Inlet Oxidizing Gas Flow Rate on IG-110 Graphite Oxidation Used in HTR-PM

Fabrication of Matrix Graphite with a High Degree of Graphitization for Spherical Fuel Elements by Using Natural Microcrystalline Graphite Fillers

High Temperature Gasification of High Heating-Rate Chars Using a Flat-Flame Reactor

SiC/SiO2 Coating on Matrix Graphite Spheres of HTR Fuel Element Produced by a Two-Step Pack Cementation/High-Temperature Oxidation Process

Effects of porosity and temperature on oxidation behavior in air of selected nuclear graphites