Icone23-1444 design of the ground crane and shielding cask for the spent fuel canister of htr-pm
Jinhua WANG,Xiang LIU,Bing WANG,Yue LI,Bin WU
DOI: https://doi.org/10.1299/jsmeicone.2015.23._icone23-1_204
2015-01-01
Abstract:The High Temperature gas cooled Reactor Pebble bed Module (HTR-PM) is in design and construction process in China, which is considered as one of the candidates for the Gen-IV nuclear power plant, and has advantage of inherent safety, avoiding nuclear proliferation, high temperature industry heat production and so on. The sphere fuel element is used in HTR-PM. The fuel particles are spread in the fuel element, and the sphere element's diameter is 60mm after oppression. After discharged from the HTR reactor core, the spent fuel element would be transferred into the spent fuel canister. The spent fuel canister would be stored in the spent fuel storage well after fully loaded. In the process of the spent fuel storage and operation, it is required to ensure the operation safety, subcritical, radiation shielding safety and residual heat removal safety. In order to decrease the price of the spent fuel canister, the canister was designed as a thin shell vessel, which has weak radiation shielding function, and cannot fulfill safety requirement of radiation shielding, so it is required to research and design a set of devices, which could provide enough radiation shielding for the spent fuel canister, and the device could also transfer the spent fuel canister safely and reliably, and then the safety of the operation staff and the facility could be ensured. The concrete shielding well lid is set on top of the storage well, when the spent fuel canister is needed to put into the storage well, the well lid would be taken out from its mounting position. In the operation process of the spent fuel canister and the concrete shielding well lid, the ground crane with accurate positioning function is required to position the spent fuel canister and the concrete shielding well lid to the operating position. The main components of the ground crane system includes: Crane bridge, shielding cask, neutron shielding boron barrel, canister hoisting mechanism, well lid hoisting mechanism, bottom plate opening mechanism, shielding strip mechanism, residual removal blowers, butterfly valves, ground rails, cable sliding bridge, encoder positioning scale and so on. The ground crane could satisfy the accurate positioning and safe operation of the spent fuel canister, and could ensure the operating reliability of the spent fuel canister and the concrete shielding well lid in HTR-PM operational period.