Abstract:Corrugated plate dryer (CPD) plays a vital role in the steam generator. In the CPD, the droplet impinging on the corrugated plate (CP) of the CPD, and the behavior after the impacting affects the separation efficiency of the CPD. The mechanical study of droplets movement on corrugated plate provides a theoretical basis for optimizing the design of the CPD. This paper analyzes the experimental phenomenon of droplet impacting on the dry inclined wall (DIW). The maximum spreading diameter (MSD) of droplet on the DIW is analyzed by combining theory with experiment, and a semi-empirical equation is obtained, which is fits well with the experimental data with error within 5%. The secondary droplet is analyzed by pixel analysis. The following conclusions were obtained that with the inclination angle (IA) increasing, the front spreading factor (FSF) will increases, the back spreading factor (BSF) decreases. When We increases, the SF of the droplet impacting the DIW increases, and when the Oh increases, the SF of the droplet impacting the DIW decreases. In the theoretical analysis of the separation performance of the dryer of a nuclear power plant, the influence of the Oh needs to be considered in the early stage of operation. The influence of We is mainly considered in the middle and late stages of the operation process. In the operation of nuclear power plants, artificial intelligence algorithms and control methods can be used to adjust the operating conditions of the CPD inlet droplets to ensure that the steam-water separation efficiency of CPD reaches the highest value. The above conclusion can provide guidance for the design of the CP of the steam generators in nuclear power plants.

A piezoelectric droplet generating device for experiment in successive droplets impacting onto solid surface

Droplet Jetting of Piezoelectric Printhead and Corresponding Effect Factors

A Fixed-Frequency,Single-Droplet Piezoelectric Generator for Research in Steady-State Droplet Evaporation and Combustion

Scalable Droplet Generator Design Using Parallel-Arranged Capillaries with Axial Misalignment

A Droplet Generator Using Piezoelectric Ceramics to Impact Metallic Pellets

Electric Field-Based Regulation of Satellite Droplets Generated by Continuous Jet Breakup

Formation and Elimination of Satellite Droplets during Monodisperse Droplet Generation by Using Piezoelectric Method

A Piezoelectric Micropumping Device

Dual-stream of Monodisperse Droplet Generator

Electric Field-Assisted Droplet Formation Using Piezoactuation-Based Drop-On-Demand Inkjet Printing

Fluid-Solid Coupled Characteristics Of Piezo-Electrically Actuated Micro-Droplet Generator

Visual experimental study of droplet impinging on liquid film and analysis of droplet evolution characteristics

Design and Fabrication of A Piezoelectric Bend Mode Drop-On-Demand Inkjet Printhead with Interchangeable Nozzle

The Design and Evaluation of a High-Speed Jet Dispenser Driven by Single Piezoelectric Stack

Experimental investigation of cavity stability for a gas-jet penetrating into a liquid sheet

Viscoelastic fluid droplet generating device with particle size capable of being controlled

The frequency design of nozzles layout of the piezoelectrically actuated micro droplet generator based on a fluid-solid interaction modal analysis

A Versatile Droplet on Demand Generator Based on Active Pressure Control

Design of Piezoelectric Micro-Droplet Injector

Deformation characteristics of a single droplet driven by a piezoelectric nozzle of the drop-on-demand inkjet system

Experimental analysis of droplet impacting on inclined wall of the corrugated plate dryer in steam generator of nuclear power plants