Abstract:This paper studies control strategies for an AC/AC system based on a modular multilevel matrix converter (M3C) when an asymmetric fault occurs in the secondary side ac system. Firstly, the operating principle of M3C is briefly introduced and verified by simulation. Then, based on its mathematical model by double αβ0 transformation, the decoupled control strategies for the primary side and secondary side systems are designed. In view of the asymmetric fault condition of the secondary side system, the positive sequence and negative sequence components of voltages and currents are separated and extracted, and then a proportional resonant controller (PR) is used to regulate the positive and negative sequence currents at the same time to realize decoupled current control in the αβ reference frames. The capacitor voltage balancing control, which consists of an inter-subconverter balancing control and an inner-subconverter balancing control, is realized by adjusting four circulating currents. Finally, the proposed control strategy is validated by simulation in the PSCAD/EMTDC software (Manitoba HVDC Research Center, Canada). The result shows that during the period of the BC-phase short-circuit fault occurring in the secondary side system, the whole system can still operate stably and transmit a certain amount of active power, according to their set values. Furthermore, the capacitor voltages are balanced, with a slight increase during the fault period. The simulation results verify the effectiveness of the proposed control strategy.

Symmetric steady state analysis and decoupled control of three phase three wire modular multilevel converters

Analysis and Control of Modular Multilevel Converters Under Unbalanced Conditions

Control of Modular Multilevel Converter Under Imbalance of AC Power System

Study of Unbalanced Circular Current Suppressing for Modular Multilevel Converter

A Novel CCSC for Circulating Current Suppression in Modular Multilevel Converters

Analysis and Control of Modular Multilevel Converters under Asymmetric Arm Impedance Conditions

Control of Modular Multilevel Converter Based on Stationary Frame under Unbalanced AC System

Decoupled Control of Modular Multilevel Converter Based on Intermediate Controllable Voltages.

Closed-Loop Decoupled Control and Implementation of the Modular Multilevel Matrix Converter in Similar/Equal Frequency Operation

Analysis and Injection Control of Circulating Current for Modular Multilevel Converters

Introduction, Modeling and Simulation of Modular Multilevel Converter

A new approach for suppressing DC voltage ripples of MMC-HVDC

A Steady-State Analysis Method for a Modular Multilevel Converter

AC and DC Current Hybrid Control Strategy for Modular Multilevel Converter

A Control System for Large-Scale Modular Multilevel Converters.

Low Frequency Operation Control Method for Modular Multilevel Converter Based on Improved Arm Current Prediction

Analysis of Sub-module Capacitor Voltage Ripples and Circulating Currents in Modular Multilevel Converters

The Unified Model and Optimal Operation Analysis for A Modular Multilevel Converter

Performance Analysis and Optimization of Circulating Current Control for Modular Multilevel Converter

Energy-balancing Control Strategy for Modular Multilevel Converters under Submodule Fault Conditions

Research on an Asymmetric Fault Control Strategy for an AC/AC System Based on a Modular Multilevel Matrix Converter