Abstract:The correct electric power fluctuation process of a wind farm is essential for the operation and studying of the power grid integrated with wind power. A complete wind energy conversion model, that should take both the spatial effects and the overall effect of all the pitch angle controllers into account, is required to convert the wind fluctuation into the electric power fluctuation. Although some equivalent models have been proposed in previous studies, there is no simple solution for equivalently modeling the non-synchronous actions of the pitch angle controllers in individual wind turbine generators. This study found the relationship between the overall effect of all the pitch angle controllers and the spatial effects of the wind farm and presented a theoretical derivation of the frequency-domain equivalent modeling method. The proposed modeling method is the simplest way to obtain the equivalent model of the complete wind energy conversion process of a wind farm with consideration of all the spatial effects and the overall effects of all the pitch angle controllers. The only input signal of the proposed equivalent model is the speed of the wind before entering the wind farm, which is called the "original incoming wind speed" and the only output signal is the total power of the wind farm. In this proposed equivalent modeling method, a discrete transfer function for representing both the wind energy conversion process, and all the spatial effects of a wind farm, can be obtained, first through a wind process below the rated wind speed. Second, a compensation factor for calculating a "compensation wind speed" of the original incoming wind can be obtained through a wind process that partly exceeds the rated wind speed. Using this compensation wind speed, a compensation power with negative values can be obtained to represent the total reduced power caused by the pitch angle controllers in individual wind turbine generators. A frequency-domain equivalent model has been identified and validated by field measurements of an actual wind farm. The normalized root-mean-squared error of the model is less than 8% over the entire wind process, and the maximum error of the power ramp rate in 10 min is less than 5 MW. Finally, an example is provided to demonstrate the online use of the proposed model to convert the forecasted wind speed into output power of a wind farm in ultrashort-term wind power forecast.

A JOINT ITERATION METHOD FOR LOAD FLOW CALCULATION OF POWER SYSTEM CONTAINING UNIFIED WIND FARM AND ITS APPLICATION

Probabilistic Load Flow Computation of a Power System Containing Wind Farms Using the Method of Combined Cumulants and Gram-Charlier Expansion

Transfer Function Based Equivalent Modeling Method for Wind Farm

A Dynamic Equivalent Method for Doubly-fed Induction Generator Wind Farm Based on the Thevenin Equivalent Circuit

Equivalent Modeling of Wind Energy Conversion Considering Overall Effect of Pitch Angle Controllers in Wind Farm

Comparative studies on equivalent modeling methods for wind farms based on non-electric parameters

Improved Newton-Raphson method with simplified Jacobian matrix and optimized iteration rate for power flow calculation of power system

A Power Flow Analysis Method for the Integrated Electricity-Heat System in Distribution Network Based on Forward/backward Iterations

SIMULATION OF FLUCTUATING WIND IN WIND FARM AND DYNAMIC RESPONSE OF WIND TURBINE TOWER

Development of a three‐phase power‐flow calculation method for distribution systems with automatic handling of arbitrary winding connections of transformers

Power Flow Analysis Based on the Secant Method in the Environment of the Offshore Wind Farm

An Asynchronous Iterative Distributed Algorithm for Unified Power Flow Calculation of Vertically Integrated Power Systems

CONSTRAINED LOAD FLOW CALCULATION BY SEQUENTIAL QUADRATIC PROGRAMMING METHOD

APPLICATION AND SIMULATION OF POWER SPLIT IN HYBRID TRANSMISSION WIND TURBINES

A Joint Probabilistic Analytical Model with Consideration of Wind Power and Load Uncertainties

A Dynamic Equivalent Aggregation Method of Wind Turbine Systems with a Full‐scale Power Converter for Electromagnetic Transient Simulations

Power Flow Calculation Methods for Power Systems with Novel Structure UPFC

A New Short-Circuit Current Calculation and Fault Analysis Method Suitable for Doubly Fed Wind Farm Groups

Power system probabilistic production simulation including wind farms

Distributed Dynamic Power Flow Calculation Based on Decomposition and Coordination

Joint Distribution Calculation with Probabilistic Power Flow Considering Dependencies Among Multiple Wind Power Generations