Abstract:Direct numerical simulations of non-premixed fuel-rich methane–oxygen flames at 20 bar are conducted to investigate the turbulent mixing burning of gaseous propellants in rocket engines. The reacting flow is simulated by using an EBI-DNS solver within an OpenFOAM frame. The transport of species is resolved with finite-rate chemistry by using a complex skeletal mechanism that entails 21 species. Two different flames at low and high Reynolds numbers are considered to study the sensitivity of the flame dynamics to turbulence. Regime markers are used to measure the probability of the flow to burn in premixed and non-premixed conditions at different regions. The local heat release statistics are studied in order to understand the drivers in the development of the turbulent diffusion flame. Despite the eminent non-premixed configuration, a significant amount of combustion takes place in premixed conditions. Premixed combustion is viable in both lean and fuel-rich regions, relatively far from the stoichiometric line. It has been found that a growing turbulent kinetic energy is detrimental to combustion in fuel-rich premixed conditions. This is motivated by the disruption of the local premixed flame front, which promotes fuel transport into the diffusion flame. In addition, at downstream positions, higher turbulence enables the advection of methane into the lean core of the flame, enhancing the burning rates in these regions. Therefore, the primary effect of turbulence is to increase the fraction of propellants burnt in oxygen-rich and near-stoichiometric conditions. Consequently, the mixture fraction of the products shifts towards lean conditions, influencing combustion completion at downstream positions.

Interactions Between Turbulent Flow and Diffusion Flame of Composite Propellant in a Solid Rocket Motor with Sidewall Mass Injection

Flame Dynamics of AP/HTPB Composite Propellant in Unsteady Rocket Motor Based on Multilayer Sandwich Model

Analysis of diffusion flame structure of solid composite propellant

New Method to Determine the Velocities of Particles on a Solid Propellant Surface in a Solid Rocket Motor

Theoretical study of the flame describing function of AP/HTPB propellant flame based on sandwich model

Effect of combustion gas mass flow rate on carbon/carbon composite nozzle ablation in a solid rocket motor

Investigation on the Microscale Combustion Characteristics of AP/HTPB Propellant under Wide Pressure Range

Study on flow and combustion characteristics in the thrust chamber of powder rocket

A Microscale Combustion Model and Numerical Analysis of AP/HTPB Composite Propellant

Study on acceleration-based combustion for low-burning rate HTPB propellant

Numerical Simulation of Microscopic Combustion of AP/HTPB with Coupling Between Gas and Solid Phases

Numerical Simulation of Micro-scale Combustion Characteristics of AP/HTPB Propellant

Particle tracking in combustion chamber of solid rocket motor

Experimental Method of Mixing and Combustion in Solid Propellant Air Turbo Rocket

The Decoupled Effect of Oxidizer Mass Flux and Combustion Pressure on Turbulent Combustion Characteristics of Finite-Length Solid Fuel

Combustion Regimes in Turbulent Non-Premixed Flames for Space Propulsion

Numerical analysis on combustion instabilities in end-burning-grain solid rocket motors utilizing pressure-coupled response functions

Evaluation of Mixing Effect on Coupled Heat Release and Transfer Performance of a Novel Segregated Solid Rocket Motor

Numerical Investigation on Self-ignition and Flammability Characteristics in Solid Fuel Scramjet Combustor

Characteristics of the Combustion Chamber of a Boron-Based Solid Propellant Ducted Rocket with a Chin-Type Inlet

Numerical Investigation on the Effect of Ammonium Perchlorate Content and Position on the Combustion Characteristics of an Ammonium Perchlorate/Hydroxyl-Terminated Polybutadiene Propellant