Xingwei Zheng,Jiangang Li,Jiansheng Hu,Haiqing Liu,Yinxian Jie,Shouxin Wang,Jiahong Li,Yanming Duan,Miaohui Li,Yongchun Li,Ling Zhang,Yang Ye,Qingquan Yang,Tao Zhang,Yingjie Cheng,Jichan Xu,Liang Wang,Liqing Xu,Hailin Zhao,Fudi Wang,Shiyao Lin,Bin Wu,Bo Lyu,Guosheng Xu,Xiang Gao,Tonghui Shi,Kaiyang He,Heng Lan,Nan Chu,Bin Cao,Zhen Sun,Guizhong Zuo,Jun Ren,Huidong Zhuang,Changzheng Li,Xiaolin Yuan,Yaowei Yu,Houyin Wang,Yue Chen,Jinhua Wu

Abstract:Increasing the density in a tokamak is limited by the so-called density limit, which is generally performed as an appearance of disruption causing loss of plasma confinement, or a degradation of high confinement mode which could further lead to a H -> L transition. The L-mode and H-mode density limit has been investigated in EAST tokamak. Experimental results suggest that density limits could be triggered by either edge cooling or excessive central radiation. The L-mode density limit disruption is generally triggered by edge cooling, which leads to the current profile shrinkage and then destabilizes a 2/1 tearing mode, ultimately resulting in a disruption. The L-mode density limit scaling agrees well with the Greenwald limit in EAST. The observed H-mode density limit in EAST is an operational-space limit with a value of 0.8 similar to 0.9n(GW). High density H-mode heated by neutral beam injection (NBI) and lower hybrid current drive (LHCD) are analyzed, respectively. The constancy of the edge density gradients in H-mode indicates a critical limit caused perhaps by e.g. ballooning induced transport. The maximum density is accessed at the H -> L transition which is generally caused by the excessive core radiation due to high Z impurities (Fe, Cu). Operating at a high density (>2.8 x 10(19) m(-3)) is favorable for suppressing the beam shine through NBI. High density H-mode up to 5.3 x 10(19) m(-3) (similar to 0.8n(GW)) could be sustained by 2 MW 4.6 GHz LHCD alone, and its current drive efficiency is studied. Statistics show that good control of impurities and recycling facilitate high density operation. With careful control of these factors, high density up to 0.93n(GW) stable H-mode operation was carried out heated by 1.7 MW LHCD and 1.9 MW ion cyclotron resonance heating with supersonic molecular beam injection fueling.

Survey of Density Modulation Experiments on the HT-7 Tokamak

New Experimental Results Obtained using Microwave Reflectometry in HL-2 A Tokamak

Present Progress of Plasma Transport Study on HL-2A

Overview of Experimental Results on the HL-2A Tokamak

Microwave Reflectometry for Plasma Density Profile Measurements on Hl-2a Tokamak

A method of particle transport study using supersonic molecular beam injection and microwave reflectometry on HL-2A tokamak.

Study of Particle Transport in Ac Plasmas on Ht-7 Tokamak

Experimental Phenomena of Improved Ohmic Confinement Induced by Modulated Toroidal Current on the Ht-7 Tokamak

The Experiment of Modulated Toroidal Current on HT-7 and HT-6M Tokamak

Density Modulation Experiment to Determine Transport Coefficients on Joint-TEXT Tokamak.

Study of Density Fluctuation During Low Hybrid Current Drive on HT-7 Tokamak

High Density Operation on the HT-7 Superconducting Tokamak

Boundary Turbulence and Transport in Density Scanning Experiment on Th-7 Tokamak

Density Limits Investigation and High Density Operation in EAST Tokamak

Experimental Investigation of Energy Confinement in the HT-7 Tokamak

Experimental study of electron scale density fluctuation on HT-7 Tokamak

PSI issues toward steady state plasmas in the HT-7 tokamak

Studies of high confinement plasma with lower hybrid current drive in the HT-7 superconducting tokamak

Properties of Density Fluctuations Induced by Geodesic Acoustic Mode in the Edge of Ht-7 Tokamak

Modification of Boundary Parameters and Fluctuations by IBW and LHCD in the HT-7 Tokamak

Investigation of the Energy Confinement in Ohmic and LHCD Plasmas in HT-7