Friction stir riveting (FSR) of AA6061-T6 aluminum alloy and DP600 steel
He Shan,Yunwu Ma,Sizhe Niu,Bingxin Yang,Ming Lou,Yongbing Li,Zhongqin Lin
DOI: https://doi.org/10.1016/j.jmatprotec.2021.117156
IF: 6.3
2021-09-01
Journal of Materials Processing Technology
Abstract:<p>The increasing demand for lightweighting in the automobile industry drives the mix-use of high specific strength materials, such as aluminum alloy and advanced high strength steel (AHSS). However, the differences in physical and metallurgical properties of aluminum alloy and steel, and the increase of steel strength have brought great challenges to the traditional spot joining technologies. This paper proposed a novel friction stir riveting (FSR) process to join aluminum alloy and AHSS sheets. In the FSR process, a high-speed rotating semi-hollow rivet penetrates through the aluminum sheet and is then friction welded with the steel sheet to form an annular solid phase welding zone, which mechanically locks the aluminum sheet between the rivet cap and the steel sheet, creating a solid phase-mechanical hybrid joint. The joint macro morphology formation, the solid phase welding mechanism, the thermo-mechanical coupled effects on microstructures and microhardness, and the tensile-shear performance of the joints were investigated. The results indicate that the FSR process achieved successful joining of AA6061-T6 and DP600. However, the joint performance was limited by a thin layer of inclusion in the solid phase welding zone, which was produced after the rivet cavity being fully filled by the trapped aluminum alloy. Further optimization of the rivet cavity and corresponding process parameters is necessary to obtain an inclusion-free FSR joint. The FSR process is expected to provide a new industrial solution for the joining of light alloy to steel and offers new insight into the solid phase joining of tube-sheet structures.</p>
materials science, multidisciplinary,engineering, manufacturing, industrial