Abstract:Magnetic bearings (MBs) enable the rotor to run at high speed without lubrication due to no mechanical contact. However, the inherent hysteresis of ferromagnetic materials affects the support characteristics, reducing the design performance and stability margin of MBs, especially for axial MBs using materials with high coercive force. To analyze and compensate for the hysteresis effect on the electromagnetic force in axial MBs, an efficient method is proposed in this paper. Firstly, the hysteresis properties of the ferromagnetic materials are simulated by the Preisach model, and the B-H relationships under any external magnetic field can be determined. Taking into account the non-ideal factors such as hysteresis and saturation effects, the nonlinear magnetic circuit model of the axial MBs is established. The magnetic flux density working point under different control currents and eccentric displacements can be determined through iterative calculation, and then the air gap flux density distribution and electromagnetic force of the axial MBs are calculated. On this basis, the adverse effects of hysteresis on the bearing capacity and system stability of axial MBs are analyzed. A compensation algorithm is designed based on the inverse model to reduce the hysteresis effect. The inverse model is approximated modeled by the Lissajous curve. Finally, the proposed analysis and control methods are verified by the finite element method (FEM) or experiments. The results show that the proposed analysis method is capable of accomplishing good accuracy and requires less computation time than FEM, it can be applied to arbitrary current variation processes. In addition, the phase lag of the system is effectively improved with the compensation algorithm.

Theory and Simulation of Linearized Force Coefficients for Active Magnetic Bearings with Multiple Magnetic Poles

Modeling and Analysis of a Biaxial Noncontact Lorentz Force Actuator

Stiffness Analysis And Levitation Force Control Of Active Magnetic Bearing For A Partially-Self-Bearing Flywheel System

Study on Inverter-fed Three-pole Active Magnetic Bearing

Dynamic Coefficients of Radial Magnetic Bearings and Coupling of Magnetic Force and Magnetic Moment: A Simulation Study

Nonlinear Analytical Model of Heteropolar Radial Magnetic Bearing

Active Control of Bearing Force Transmissibility for Active Magnetic Bearings-rigid Rotor Systems

The Precise Modeling and Analysis of Demodulation Approach in Self-sensing Active Magnetic Bearings

Modeling and Design of Permanent Magnet Biased Radial-Axial Magnetic Bearing by Extended Circuit Theory

All-coefficient Adaptive Control of Active Magnetic Bearing System Based on Characteristic Model

Output Feedback Dynamical Compensation Via EigenStructure Assignment for Active Magnetic Bearings-Rigid Rotor Systems.

Cooperative Rotor Position Estimation of Active Magnetic Bearings with Unsaturated Magnetic Bias

Principle and simulation of a 5-phase bearingless permanent magnet-type synchronous motor

Identification Of The Dynamic Coefficients Of Journal Active Magnetic Bearing

Novel Decoupling Control and Eigenstructure Assignment Strategies for Rigid Active Magnetic Bearing Rotor System

Analysis and Comparison of Inductance and Suspension Force for 2-4 Type and 4-2 Type Multiphase Permanent Magnet Bearingless Motors

Vibration Suppressing with Mixed Weight for Multi-Targets in Active Magnetic Bearing-Flexible Rotor System

Current Compensation Control of Multiple Frequency Vibrations of the Rotor in Active Magnetic Bearing High Speed Motors

Dynamic Modeling of the Active Magnetic Bearing System Operating in Base Motion Condition

Analysis and Compensation of Hysteresis Effect on Electromagnetic Force in Axial Magnetic Bearings

Calculation of Electromagnetic Force in Magnetic Bearings