Abstract:Perovskite solar cells (PSCs) have attracted considerable interest because of their high potential for solar energy conversion. Power conversion efficiencies of the PSCs have rapidly increased from 3.8 to over 20% only in the past few years. PSCs have several similarities to dye-sensitized solar cells in their device compositions; mesoporous TiO2 (mp-TiO2) is sensitized by light-absorbing components and placed into a medium containing hole transporting materials (HTMs). On the other hand, the perovskite materials for the light-harvesting, for example, CH3NH3PbI3 (MAPbI3), have a greater advantage for the photovoltaic applications; extremely long photocarrier diffusion lengths (over 1 μm) enable carrier transports without singnificant loss. In this respect, the surface states, that can be possible recombination centers, are also of great importance. Availability of solution processes is another important aspect in terms of low cost fabrication of PSCs. Two-step methods, where PbI2 is first introduced from solution onto a mp-TiO2 film and subsequently transformed into the MAPbI3 by the exposition of a solution containing MAI, suggest that use of such a high PbI2 concentration is crucial to obtain higher performance. The experiments also indicate that the PbI2-rich growth condition modifies TiO2/ or HTM/MAPbI3 interfaces in such a way that the photocarrier transport is improved. Thus, the characteristics of surfaces and interfaces play key roles in the high efficiencies of the PSCs. In this Account, we focus on the structural stability and electronic states of the representative (110), (001), (100), and (101) surfaces of tetragonal MAPbI3, which can be regarded as reasonable model HTM/MAPbI3 interfaces, by use of first-principles calculations. By examining various types of PbIx polyhedron terminations, we found that there are two major phases on all of the four surface facets. They can be classified as vacant- and flat-type terminations, and the former is more stable than the latter under thermodynamically equilibrium conditions. More interestingly, both terminations can coexist especially on the more probable (110) and (001) surfaces. Electronic states, that is, projected density of states, of the stable-vacant and PbI2-rich-flat terminations on the two surfaces are almost the same as that in bulk MAPbI3. These surfaces can contribute to the long carrier lifetime actually observed for the PSCs because they have no midgap surface states. Furthermore, the shallow surface states on the (110) and (001) flat terminations can be efficient intermediates for hole transport to HTMs. Consequently, the formation of the flat terminations under the PbI2-rich condition will be beneficial for the improvement of PSC performance.

Surface Properties of CH 3 NH 3 PbI 3 for Perovskite Solar Cells Published as part of the Accounts of Chemical Research special issue “ Lead Halide Perovskites for Solar Energy Conversion ”

Structural, Mechanical, and Optoelectronic Properties of CH3NH3PbI3 as a Photoactive Layer in Perovskite Solar Cell

Synthesis of CH 3 NH 3 Sr x Pb (1- x ) I 3 with Less Pb Content and Its Application in All-Solid Thin Film Solar Cells

Fabrication and characterization of CH3NH3(Cs)Pb(Sn)I3(Br) perovskite solar cells

Organic-Inorganic Hybrid CH3NH3PbI3 Perovskite Solar Cell Nanoclusters: Revealing Ultra-Strong Hydrogen Bonding and Mulliken Inner Complexes and Their Implication in Materials Design

Optimization of the Photoelectric Properties and Photo-Stability of CH3NH3PbBrXI3-X Films for Efficient Planar Perovskite Solar Cells

Efficient Mesoscopic Perovskite Solar Cells based on CH 3 NH 3 PbI 2 Br Light Absorber

Efficient and reproducible CH3NH3PbI(3-x)(SCN)x perovskite based planar solar cells.

Vacuum-Assisted Thermal Annealing of CH3NH3PbI3 for Highly Stable and Efficient Perovskite Solar Cells

Constructing the Electronic Structure of CH3NH3PbI3 and CH3NH3PbBr3 Perovskite Thin Films from Single-Crystal Band Structure Measurements.

Direct Conversion of CH3NH3PbI3 from Electrodeposited PbO for Highly Efficient Planar Perovskite Solar Cells

CH3NH3PbI3 Converted from Reactive Magnetron Sputtered PbO for Large Area Perovskite Solar Cells

Lead Methylammonium Triiodide Perovskite-Based Solar Cells: an Interfacial Charge-Transfer Investigation.

Calculation and Fabrication of a CH3NH3Pb(SCN)xI3−x Perovskite Film as a Light Absorber in Carbon-based Hole-transport-layer-free Perovskite Solar Cells

Synthesis of Copper Zinc Tin Sulfide Cu2ZnSnS4 (CZTS) Nanoparticles Doped Material with High Properties for CH3NH3PbI3 Perovskite Solar Cells

Enhanced Performance of Perovskite CH3NH3PbI3 Solar Cell by Using CH3NH3I as Additive in Sequential Deposition.

Ab Initio Thermodynamic Study of PbI$_2$ and CH$_3$NH$_3$PbI$_3$ Surfaces in Reaction with CH$_3$NH$_2$ Gas for Perovskite Solar Cells

Tunable Br-doping CH 3 NH 3 PbI 3−x Br X Thin Films for Efficient Planar Perovskite Solar Cells

Surface Properties of CH3NH3PbI3 for Perovskite Solar Cells.

Electronic Structure of Ch3nh3pbx3 Perovskites: Dependence on the Halide Moiety

The Electronic Properties Of Ch3nh3pbi3 Perovskite Surfaces Tuned By Inverted Polarities Of Pyridine And Ethylamine