Abstract:To study the impact of introducing fluorine atoms onto the conjugated phenyl side chains of benzo[1,2-b:4,5-b′]dithiophene (BDT)-based copolymers, three novel donor−π–acceptor (D−π–A) alternative polymers PE40, PE42, and PE44 were designed and synthesized. The phenyl-substituted-BDT, thieno[3,2-b]thiophene, and benzo[d][1,2,3]triazole (BTA) served as the donor, π-bridge, and acceptor units, respectively, to enable linear polymer backbones. When introducing two or four fluorine atoms into the phenyl side units of PE40, the polymers PE42 and PE44 demonstrate a gradual decrease of energy levels and an increase of crystallinity in the pristine and blend films. It was noted that the increase in fluorine atoms gradually improved the performance parameters of polymer solar cells (PSCs) with Y6 as the acceptor. The PE40:Y6 device yielded a power conversion efficiency (PCE) of up to 7.07% with a short-circuit (JSC) of 21.36 mA cm–2, an open-circuVOC) of 0.65 V, and a fill factor (FF) of 0.51, and PE42:Y6 exhibited a better PCE of 10.11% (JSC = 23.25 mA cm–2, VOC = 0.74 V, and FF = 0.59), while PE44:Y6 exhibited the best PCE of 13.62% (JSC = 25.29 mA cm–2, VOC = 0.82 V, and FF = 0.66). The suitable energy offsets between the donor and the acceptor, high and balanced charge-carrier mobility, and the optimal morphology of the blend film contributed to the high performance of PE44:Y6 combination. Our results demonstrate that introducing more fluorine atoms onto the phenyl side units of BDT is a prospective approach to break the trade-offs between VOC, JSC, and FF, and finally improve the performance of PSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c07720?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c07720</a>.Detailed synthetic routes, characterization, TGA, DSC, UV–vis spectra in solution, photoluminescence spectra, energy level diagram, AFM, and device fabrication (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c07720/suppl_file/am0c07720_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

e substitution upon the photovoltaic properties of benzothiadiazole-fl uorene alternate copolymers †

Synthesis and Photovoltaic Properties of an Alternating Polymer Based on Benzo[1,2-B:4,5-B′]dithiophene and Fluorine Substituted 4,7-Dithiophene-2-yl-2,1,3-benzothiadiazole

Benzodithiophene/Benzothiadiazole-Based ADA-Type Optoelectronic Molecules: Influence of Fluorine Substitution

Incorporation of Fluorine Onto Different Positions of Phenyl Substituted Benzo[1,2-B:4,5-B ']dithiophene Unit: Influence on Photovoltaic Properties

Optoelectronic Properties of Fluorene-Co-4,7-difuran-2,1,3-benzothiadiazole Copolymers

Effect of fluorine atoms on optoelectronic, aggregation and dielectric constants of 2,1,3-benzothiadiazole-based alternating conjugated polymers

Synthesis and Photovoltaic Performance of Novel Thiophenyl-Methylene-9h-Fluorene-Based Low Bandgap Polymers

Fluorination on electron-deficient units of benzothiadiazole-based donor-acceptor conjugated polymers for novel fullerene-based organic solar cells

Effect of Monofluoro Substitution on the Optoelectronic Properties of Benzo[c][1,2,5]thiadiazole Based Organic Semiconductors

Fluorination effects on bithiophene unit in benzodithiophene-4,8-dione based D–A type alternating copolymers for highly efficient polymer solar cells

Effects of fluorination of benzothiadiazole units on the properties of alternating cyclopentadithiophene/benzothiadiazole donor/acceptor polymers

Insights into the Influence of Fluorination Positions on Polymer Donor Materials on Photovoltaic Performance

Highly Efficient Photovoltaics and Field-Effect Transistors Based on Copolymers of Mono-Fluorinated Benzothiadiazole and Quaterthiophene: Synthesis and Effect of the Molecular Weight on Device Performance

Significantly Improved Photovoltaic Performances of the Dithiophene‐benzothiadiazole‐alt‐fluorene Copolymers by Incorporating Carbazole Units in Fluorene Moiety

Gradual Fluorination on the Phenyl Side Chains for Benzodithiophene-Based Linear Polymers to Improve the Photovoltaic Performance

Fluorene-Based Low Band-Gap Copolymers For High Performance Photovoltaic Devices

Synthesis And Photovoltaic Properties Of Fluorene-Based Copolymers

Synthesis and Photovoltaic Properties of Fluorene-Based Copolymers with Thiophene Heterocycle on the Side Chain

Enhanced Photovoltaic Properties of Di(dodecylthiophene)-Alt-2,3-di(3-octoxylphenyl)-5,8-dithieno[3,2-b]thiophene 6,7-Difluoroquinoxaline Copolymer by Fluorination

Donor Polymers Containing Benzothiadiazole and Four Thiophene Rings in Their Repeating Units with Improved Photovoltaic Performance

Synthesis and photovoltaic properties of an alternating polymer based fluorene and fluorine substituted quinoxaline derivatives