Abstract:Hydrocyclone separation technique has commonly been applied in engineering for solid-liquid separation. In aquaculture, since Hydrodynamic Vortex Separator (HDVS) is able to control flocs concentration effectively, the Recirculating Biofloc Technology (RBFT) has been gradually acknowledged (Zhu et al., 2016). In order to operate RBFT system at maximum performance, the removal efficiency of HDVS at different Hydraulic Retention Time (HRT) must be fully predictable. The aim of this work is to investigate the relationship between separation efficiency and HRT of HDVS applied in RBFT system, through Computational Fluid Dynamics (CFD) method. For this, a three-dimensional unsteady transient model was developed to simulate the hydrodynamics in HDVS based on the commercial software Workbenching 17.0. A Two Fluid Model (TFM) using kinetic theory of granular flow (KTGF) has been developed to describe the dense solid-liquid (flocs-water) flow field of HDVS in RBFT system. Additionally, the Reynolds averaged Navier-Stokes (RANS) equations with Reynolds stress turbulence model (RSM) are solved by use of the finite volume method based on the SIMPLE pressure correction algorithm in the computational domain. Finally, pilot-scale studies were conducted to evaluate the accuracy and precision of simulation models applied. The results indicate that the flocs removal efficiency of HDVS obtained from tests were less than that from the simulation results at three different HRTs. But it decreased with the decline of HRT both for experiment and simulation. Additionally, the CFD model proposed can enhance the fundamental understanding of the effects of HRT on separation efficiency and at the same time, probably coupled with physical experiment whenever necessary, offer a more reliable way for optimum control of HDVS under varying conditions. Based on the simulation results, the flocs management in RBFT system is briefly discussed.

Computational fluid dynamic ( cfd ) simulation of fluid flow in a mixer-settler extractor for rare earth metal separation

Progress on agitated apparatus for polymer devolatilization and its CFD simulation

PIV Measurement and CFD Simulation of Liquid-Liquid Flow of a Settler in Rare Earths Solvent Extraction Mixer-Settler

Numerical Study of Dense Solid-Liquid Flow in Hydrodynamic Vortex Separator Applied in Recirculating Biofloc Technology System

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

Structural Parameter Optimization of Hydraulic Vertox Separator in Recirculating Biofloc Technology System Based on Computational Fluid Dynamics

Structural Optimization of a Settler Via CFD Simulation in a Mixer-Settler

A Study on Liquid‐liquid Dispersions in a Continuous Mixer Via Computational Fluid Dynamics (CFD) Simulation Combined with Population Balance Model (PBM)

CFD simulation on shear-thinning gas-liquid dispersion in coaxial mixer

Cfd Simulations of Flow Characteristics in Pulsed-Sieve-Plate Extraction Columns

Numerical Simulation of Power Consumption and Mixing Characteristics of Novel Large-Double-blade Impeller

CFD Prediction of the Critical Agitation Speed for Complete Dispersion in Liquid‐Liquid Stirred Reactors

PIV Measurement and CFD Simulation of Liquid-Liquid Mixing in Mixer Settler with Rigid-Flexible Impeller

Numerical Simulation of Mixing Capability in Coal-Slurry Mixing Tank

Numerical Simulation of Dense Solid-Liquid Mixing in Stirred Vessel with Improved Dual Axial Impeller

Using CFD and Machine Learning to Explore Chaotic Mixing in Laminar Diameter-Transformed Stirred Tanks

Numerical simulation on low-density solid-liquid mixing process

Mixing Transport Mechanism of Three-Phase Particle Flow Based on CFD-DEM Coupling

Fluid–Solid Mixing Transfer Mechanism and Flow Patterns of the Double-Layered Impeller Stirring Tank by the CFD-DEM Method

Numerical simulation of mixing process in a stirred tank agitated by side-entering agitators

CFD Simulation of Solid Suspension in a Stirred Reactor Driven by a Dual Punched Rigid-Flexible Impeller