Abstract:Radio frequency (RF) heating technology has potential advantages for drying or sterilization of in-shell peanuts, with a critical need for understanding the dielectric properties governing energy conversion. In this study, the dielectric properties of peanut shells and kernels were measured over the frequency range of 10 MHz similar to 3 GHz, spanning temperatures from 20 to 80 degrees C. Results showed that the dielectric constant of all the samples decreased rapidly with increasing frequency, the loss factor of peanut shells and kernels with lower moisture content exhibited an initial decrease within the RF band followed by a slight increase within the microwave (MW) band, while loss factor of peanut kernels with higher moisture content decreased continuously with increase in frequency. A high temperature will enhance the sample polarization, while an elevated moisture content will provide the more polar molecules and release the more ions, so that both of them have the positive effect on the dielectric properties. It should be noted that the disruption of the coarse fiber structure and clumping phenomenon in the samples might mitigate the temperature effect. The numerical simulation results of RF heating based on the cubic regression model of dielectric properties showed that: since the loss factor was more sensitive to temperature and moisture content than dielectric constant, the loss angle tangent of the samples increased significantly with increasing moisture content, which subsequently hindered the heating rate of the samples. Meanwhile, this simulation results derived the optimal conditions, with the fastest heating rate at 20% moisture content and the most uniform RF heating (UI=0.16331) at 30% moisture content. Consequently, the loading thickness of in -shell peanuts should be controlled within 11 cm when designing a 27.12 MHz RF dryer. This research has a profound meaning to promote the efficiency of RF heat treatment of in-shell peanuts.

Developing Hot Air-Assisted Radio Frequency Drying for In-Shell Walnuts

Simultaneous Hot-Air Assisted Radio Frequency Drying and Disinfestation for In-Shell Walnuts Using a Two-Stage Strategy

Developing Hot Air-Assisted Radio Frequency Drying for In-shell Macadamia Nuts

Effects of Various Radio Frequencies on Combined Drying and Disinfestation Treatments for In-Shell Walnuts

Radio frequency assisted with hot air drying protocol and uniformity of in-shell Macadamia nuts

Comparative Analyses of Three Dehydration Methods on Drying Characteristics and Oil Quality of In-shell Walnuts

Influence of Radio Frequency Treatment on In-Shell Walnut Quality and Staphylococcus Aureus ATCC 25923 Survival

Considerations in design of commercial radio frequency treatments for postharvest pest control in in-shell walnuts

Dielectric Properties of In-Shell Peanuts with Radio Frequency and Microwave Heating Treatment and RF Heating Performance

Developing Effective Radio Frequency Drying Processes for Tiger Nuts: Dynamic Analysis of Moisture State, Dielectric Properties and Quality

Heating uniformity in radio frequency treated walnut kernels with different size and density

Pilot-Scale Radio Frequency Drying of Macadamia Nuts: Heating and Drying Uniformity

Industrial-Scale Radio Frequency Treatments for Insect Control in Lentils

Radio frequency treatments to control codling moth in in-shell walnuts

Developing a Radio Frequency-Hot Air Spouting Treatment for Efficient Dehydration of Carrot Cubes: Evaluation of the Heating and Moisture Distribution Uniformity

Developing a Combined Rotating and Air-Circulating System for Improving Radio Frequency Heating Uniformity and Controlling Aspergillus in Almond Kernels

Temperature and Moisture Dependent Dielectric and Thermal Properties of Walnut Components Associated with Radio Frequency and Microwave Pasteurization

Radio Frequency Heating: a Potential Method for Post-Harvest Pest Control in Nuts and Dry Products

Effects of Hot Air Assisted Radio Frequency Drying on Heating Uniformity, Drying Characteristics and Quality of Paddy

Almond Quality As Influenced by Radio Frequency Heat Treatments for Disinfestation

Investigation of Hot Air–Assisted Radio Frequency As a Final-Stage Drying of Pre-dried Carrot Cubes