Abstract:Green corrosion inhibitors have an important role in reducing the corrosion rate of metals and the effects of toxic chemicals in the environment. In this study, the inhibition effect of pomegranate peel extract ( PPE ) with concentration of 0.5, 1, 1.5, 2, 2.5 and 3 g/L on the aluminum 1050 alloy corrosion behavior in the nitric acid solution investigates using the weight loss, electrochemical techniques, scanning electron microscope ( SEM ), atomic force microscope ( AFM ), contact angle images, gas chromatography-mass spectrometer ( GC-MS ) analysis, fourier transform Infrared spectroscopy ( FTIR ) and ultraviolet radiation ( UV-IR ). And, the ( UV-IR ), ( GC-MS ), and FTIR results confirm the presence of many organic compounds (Containing the N , S , and O atoms), which are responsible for inhibitor performance and absorption phenomena. Meanwhile, the electrochemical impedance results ( EIS ) indicate that the double layer capacity decreases and the corrosion resistance (Corrosion current density ( i corr ) from 0.128 to 0.009 mA/cm 2 ) increases with the increase of the inhibitor concentration (The inhibition efficiency increased with increasing the inhibitor concentration from % 54.29 to the % 92.58 at (1 to 3 g/L ). In addition, the corrosion current density decreases with the increase of the inhibitor concentration using the potentiodynamic polarization ( PDP ) test. However, the corrosion rate enhances with increasing the temperature. From the other hand, quantum chemical ( QC ) calculation and molecular dynamics ( MD ) simulation perform to investigate the theory of the adsorption mechanism. According to these studies, the adsorption of PPE on the aluminum 1050 alloy surface is agreement with the langmuir isotherm and as a result it is a mixed-type inhibitor. In final the SEM and AFM results show that the corrosion rate of the aluminum 1050 alloy surface is significantly reduced after the addition of the inhibitor to the corrosive environment. Furthermore, the contact angle image shows that the inhibited aluminum surface has a hydrophobic property in an aqueous solution. And, the QC calculation and MD simulation clarify well the thin layer formation due to the good adsorption of inhibitor (PPE) on the surface of aluminum 1050 alloy in the nitric acid solution, theoretically. It is concluded that PPE will inhibit the surface of aluminum against the corrosion agents in acidic environment and can use as a green inhibitor.

Stem Extract of Brahmi ( Bacopa Monnieri ) As Green Corrosion Inhibitor for Aluminum in NaOH Solution

Sinapis Alba Extract as Green Corrosion Inhibitor for Aluminum in Alkaline Media

Ajuga orientalis L. Extract as a Green Corrosion Inhibitor of Aluminum in an Acidic Solution: An Experimental and DFT Study

Impact of Aqueous Extract Artemisia Herba-Alba Leaves as a Green Inhibitor against Acid Activation of 2024 Aluminum Alloy

Corrosion inhibition of aluminum under basic conditions using Medicago sativa L. extract — thermodynamic studies

Corrosion Inhibition of Aluminum Alloy in 50% Ethylene Glycol Solution

Ocimum Basilicum Seeds as a New Natural Corrosion Inhibitor for AA7075-T6 Aluminum Alloy in Nacl Solution: Electrochemical, Thermodynamic, Surface, and Theoretical Studies

A study of pomegranate peel extract effect on corrosion inhibition performance on aluminum in HNO 3 solution

Xylopia aethiopica EXTRACT AS GREEN AND ECO-FRIENDLY CORROSION INHIBITOR AND ITS QUANTUM CHEMICAL ANALYSIS.

Alkaloid of Rhynchostylis retusa as Green Inhibitor for Mild Steel Corrosion in 1 M H2SO4 Solution

Corrosion Inhibition Using Harmal Leaf Extract as an Eco-Friendly Corrosion Inhibitor

Experimental, computational, and theoretical studies on the corrosion inhibition potential of green G ongronema latifolium extract as corrosion inhibitor for aluminum alloy in HCl solutions

Electrochemical and DFT studies of Terminalia bellerica fruit extract as an eco-friendly inhibitor for the corrosion of steel

Valorizing the potential of saffron petals extract for aluminium corrosion control: An integrated approach involving extraction, experimental and computational analysis

Green Inhibition of Corrosion of Aluminium Alloy 5083 by Artemisia annua L. Extract in Artificial Seawater

Investigating the corrosion inhibition of aluminium by diamine derivatives in hydrochloric acid: a multi-technique approach

The use of Robinia pseudoacacia L fruit extract as a green corrosion inhibitor in the protection of copper-based objects

Chrysophyllum Albidum extract as a new and green protective agent for metal

PLANT EXTRACTS AS CORROSION INHIBITORS FOR ALUMINUM ALLOY IN NaCL ENVIRONMENT - RECENT REVIEW

Characterization and utilization of apple peel and grape stems extract constituents as green restraints for aluminum dissolution

Inhibiting Effect of Natural Plant Leaves Extract Used as Green Corrosion Inhibitor for Mild Steel in Acidic Media