Abstract:In today's quality market, achieving the smallest feature recognition possible in the inspection process has become a higher priority than ever before. Due to com plex geometries and miniaturization of many high reliability components in the automotive, electronics and aerospace industries, achieving this level of feature recognition has also become increasingly difficult. Due to inherent limitations, many of the inspection requirements can no longer be satisfied with conventional X -ray inspection methods such as 2D X-ray inspection. For example, the depth of detail is not quantif iable, which in some cases can be vital to the manufacturing process. High resolution Computed Tomography (CT) presents an effective method of mapping the internal structure of components in three dimensions. With this technique, any internal difference that correspon ds to a contrast in material, density or porosity can be visualized and measured. These properties allow the us e of CT as an NDT tool, permitting examination of samples for internal porosity, cracks, delamination, inc lusions and mechanical fit. CT techniques are used to measure internal distances or the internal wall thicknes s of complex castings and areas which are often inaccessible for optical scanners or conventional tact ile coordinate measurement machines (CMM). The CT volume data provides information for reverse engineering or first article inspection of the entire part by mer ging it with the CAD model to generate a variance map of bot h data sets. Combined these capabilities contribute t o early detection of process and product weaknesses therefo re increasing yield and productivity. Modern microfocus and nanofocus ®1 systems are not only suitable for examinations of low absorbing materials like synthetics, but also for the analysis of the inter nal microstructure of higher absorbing metal castings, ceramics or composites containing high absorbing parti cles. High resolution CT widely expands the spectrum of X-ray detectable defects in process control and fail ure analysis increasing reliability and safety of components for, e.g., automotive, aerospace, and militar y applications. It opens a new dimension for 3D quality assurance and will partially replace destructive methods l ike cross-sectioning - saving costs and time per sample inspected. For high resolution NDT with Computed Tomography, a wide range of systems is available. This starts with microfocus X-ray systems like x|argos for real time ins pection of large castings which may be upgraded for Computed Tomography - this makes the advantages of 3D inspection affordable even for smaller companies. For high resolution high quality CT the nanotom ®1 is the first 180 kV nanoCT ®1 system with the capability to analyse small samples with the exceptional voxel-resolut ion of less than 0.5 microns per volume pixel (voxel). For example, object surfaces of molded plastics, light meta l castings and any internal details related to a variation in material, density or porosity can be visua lized and precisely measured.

Development and Applications of High Energy Industrial Computed Tomography In China

New Development of High Energy Industrial Computed Tomography (ICT)

The Applications of Industrial CT NDT Technology in Geological Research

Research Progress on Industrial Computed Tomography and its Application Analysis in Fluid Power Transmission and Control

Preliminary Research on Laser Plasma Accelerator based Inverse Compton Scattering X-ray Imaging

X-Ray Industrial Computerized Tomography System for Testing Advanced Structural Ceramics

Advanced NDT with high resolution Computed Tomography

Development Of System On 3d Image Visualization And Analyzing For Industrial Computed Tomography

Design and characterization of high energy micro-CT with a laser-based X-ray source

Introduction on the development of optimal nondestructive testing approach. Industrial computerized tomography (ICT)

High-energy High-Dose Microfocus X-ray Computed Tomography Driven by High-Average-current Photo-Injector.

3D image processing and analyzing system for industrial computed tomography

Applications of Industrial Computed Tomography Technology in the Geosciences

Recent Development of Terahertz Computed Tomography Imaging

Application of Large Industrial Computed Tomography in Nondestructive Testing of Key Components of Railway Vehicles

Recent Development in X-Ray Imaging Technology: Future and Challenges

Improvements to conventional X-ray tube-based cone-beam computed tomography system

Development of CNT Cathode Based X-ray Source and Imaging Technology

Application and Development of CT Scanning Technology in Coal Sector

Technology Development of Micro-CT with High Spatial Resolution

Towards high-energy, high-resolution computed tomography via a laser driven micro-spot gamma-ray source