Abstract:Explosives combustion is primarily classified into conductive and convective combustion. In situations where confinement is sufficiently strong, the instantaneous high pressure generated by convective combustion in cracks can cause rapid fragmentation of the explosive matrix, resulting in a significant increase in the combustion surface area and triggering a high-intensity reaction with potentially catastrophic consequences. Therefore, the study of convective combustion in cracks is crucial for ensuring the safety of weapons and explosives. Previous simulation studies have primarily used finite element analysis software, which has excellent performance in handling explosive detonation processes. However, its accuracy in describing gas behavior between explosives and constrained containers is limited. This study divides the combustion process of a pre-cracked explosive in a confined space into four stages based on reasonable assumptions and simplifications. We developed a simulation method that combines the Arrhenius formula with the MWSD model to model the combustion rate of the explosive. By introducing a correction coefficient, Con, to the Arrhenius formula, the formula and MWSD model control the first and third stages of explosive combustion, respectively, while smoothly transitioning during the second stage. We used this method to numerically simulate the experimental results of Shang Hailin et al. on a crack width of 50 μm. The simulation results include the temperature field and pressure field of the first three stages of explosive combustion and the pressure rise curve of the pressure measurement point at the same location, as in the experiment. The simulation results are consistent with the experimental results.

Numerical S imulation on Mechanism of Flame Acceleration and Deflagration to Detonation Transition for Ethylene-Oxygen System

Numerical Investigation on New Engine Combustion Charactristic of Helicopter

Numerical Investigation on Effects of Ignition Energy on Two-phase Detonation Wave Formation

Namerical Simulation on Factors Affecting Ignition Characteristics of A New Engine

Numerical Simulation of Ethylene Supersonic Combustion Using Partially Premixed Flamelet Model

Flame acceleration and deflagration to detonation transition in micro and macro scale channels

Experiments and Numerical Simulation on the Laminar Flame Speeds of Dichloromethane and Trichloromethane

Flame Acceleration and Deflagration-to-detonation Transition in Micro- and Macro-Channels: an Integrated Mechanistic Study

Flame propagation and counterflow nonpremixed ignition of mixtures of methane and ethylene

Numerical simulation of hydrocarbon gas combustion and supersonic shear flow

Numerical investigation of unsteady flame propagation assisted by low-temperature chemistry

Numerical Study of PBX 9501 Explosive Combustion Process in Confined Space

Numerical Simulation of Premixed Propane/Air Flame Propagation Using A Dynamically Thickened Flame Approach

Experiments and numerical simulation on soot formation in opposed-jet ethylene diffusion flames

Numerical Methods for Complicated Chemical Mechanism Involved in Combustion Simulation

Numerical Analysis of Gas Explosion Process in Linked Vessels

On The Structure Of Nonsooting Counterflow Ethylene And Acetylene Diffusion Flames

Extrapolation of Laminar Ethylene/Air Flame Speeds at Elevated Pressures with Flame Chemistry Analysis

Effect of ethylene fuel/air equivalence ratio on the dynamics of deflagration-to-detonation transition and detonation propagation process

Numerical Prediction of Shock-flame Structure for CH4/N2/O2 Mixtures

Laminar flame speeds and kinetic modeling of H2/O2/diluent mixtures at sub atmospheric and elevated pressures