Abstract:Graphene platelets can impart unique properties to metal matrices, such as enhanced conductivity, mechanical, thermal properties and catalytic activity. 1,2 The electrodeposited process to fabricate composite metal matrices has an advantage over other techniques because it can avoid high heat treatment and deformation during fabrication, which can damage the intrinsic structure of graphene plates. Graphene itself is difficult to disperse and incorporate into electrodeposited films, but the oxidized form, having abundant surface functional groups, can be readily dispersed into aqueous solutions. Examples of electrodeposited metals with included graphene oxide (GO) from the electrolyte include elemental deposits such as Ni, 3-4 Cu, 2,5-6 and Co. 7,8 In these studies, graphene oxide addition to the metal matrices promoted enhanced thermal conductivity in Cu, 6 grain refinement in Ni 4 and Cu 5 , improved wear resistance of Co 7,8 and in the case of Ni changed its preferred crystallographic orientation. 3 In alloy electrodeposition, the particle in the electrolyte may also alter the deposit composition through disparate changes in the individual metal ion partial current densities. The alloys containing Fe, Ni and Co from the reduction of their metal ions are of interest for their peculiar behavior, where there tends to be an inhibition of the more noble species reduction reaction (e.g. Ni, Co) in favor of the less noble (Fe) referred to as anomalous codeposition. 9 To examine the influence of graphene oxide on the deposit composition, Ni-Fe-Co alloys were galvanostatically electrodeposited from a boric acid-sulfamate electrolyte containing commercial graphene oxide plates. Rotating disk electrodes were used to control the hydrodynamic environment near the cathode. The composition, morphology and structure were examined. The addition of graphene oxide resulted in a change in deposit composition, particularly for Fe and Ni, at low cathodic current densities less than 50 mA/cm 2 , with the deposit becoming less anomalous with the addition of graphene oxide. The change in composition is thought to be derived from a decrease in adsorbed iron intermediates from an anomalous codeposition model. The partial current densities of Ni-Fe-Co deposition with a measure of ohmically corrected potential are compared with Ni-Fe, Ni and Fe deposition with graphene. References H.G. P. Kumar, M. A.Xavior, Procedia Eng. 97 1033 (2014). J. Biswal, P. R. Vundavilli, and A. Gupt, J. Electrochem. Soc., 167 146501 (2020). D. Kuang, L. Xu, L. Liu, W. Hu, Y. Wu, Appl. Surf. Sci. , 273 , 484 (2013). J. Li, Z. An, Z. Wang, M. Toda, and T. Ono, ACS Appl. Mater. Interfaces, 8 , 3969 (2016). L. P. Pavithra, B. V. Sarada, K. V. Rajulapati, T, N. Rao and G. Sundararajan, Nature Sci Rep 4 , 4049 (2014). K. Jagannadham, Metall. Mater. Trans B 43 B 316 (2012). C. Liu, F. Su, J. Liang, Appl. Surf. Sci. 351 889 (2015). A. Toosinezhad, M. Alinezhadfar, S. Mahdavi, Ceram. Int. , 46 , 16886 (2020). A. Brenner, Electrodeposition of Alloys: Principles and Practice, Academic Press Inc., New York, pp. 399-450 (1963).

Supplementary Information for Deposition of Fe-Ni Nanoparticles on Polyethyleneimine Decorated Graphene Oxide and Application in Catalytic Dehydrogenation of Ammonia Borane

Deposition of Fe-Ni nanoparticles on polyethyleneimine-decorated graphene oxide and application in catalytic dehydrogenation of ammonia borane

Amine-capped Co Nanoparticles for Highly Efficient Dehydrogenation of Ammonia Borane.

Fabrication and Electrocatalytic Performance of Graphene-fullerene Ammonium Iodide Composite Supported Pd Nanocatalyst for Ethanol Oxidation

Well Dispersed Fe 2 N Nanoparticles on Surface of Nitrogen-Doped Reduced Graphite Oxide for Highly Efficient Electrochemical Hydrogen Evolution

GO modification with PANI-PpPDA as support material for Pd-Ni and its application for ethanol electrooxidation

Regulation the surface chemistry and electronic structure of Fe/Co/N co-doped hollow graphene spheres by different atmosphere plasma to enhance oxygen reduction/hydrogen evolution performance of loaded PtNi alloy nanoparticles

Synthesis of Au-modified Reduced Graphene Oxide Supported Pd-Ni nanocomposites and electrocatalytic activity for propane- 1,3-diol oxidation

Synergistic effects of the bimetallic Ni-Fe systems and their application in the reductive amination of polyether polyols

Fishnet-like Ni–Fe–N Co-Modified Graphene Aerogel Catalyst for Highly Efficient Oxygen Reduction Reaction in an Alkaline Medium

One-pot polyelectrolyte assisted hydrothermal synthesis of NiFe 2 O 4 -reduced graphene oxide nanocomposites with improved electrochemical and photocatalytic properties

A high-performance Pt–Co bimetallic catalyst with polyethyleneimine decorated graphene oxide as support for hydrolysis of ammonia borane

Electrodeposition of Ni-Fe-Co and Ni-Fe Graphene Oxide Alloy Composites

Engineering of Uniform Dispersed Ni Nanoparticles Supported on Carbon Nanosheets for Reduction of Nitroarenes to Aminoarenes

Iron Nanoparticles Embedded in Graphitic Carbon Matrix as Heterogeneous Catalysts for the Oxidative C−N Coupling of Aromatic N−H Compounds and Amides

Pore Confinement Strategy to Construct Uniformly-Sized Ni on Carbon Nanosheets for Exceptional Catalytic Hydrogenation

Synthesis of Fe2O3/rGO/N-rGO Catalyst and Its Application in Selective Hydrogenation of Nitrobenzene

Fabrication and characterization of NiCu/GO and NiCu/rGO nanocomposites for fuel cell application

Preparation of graphene supported nickel nanoparticles and their application to methanol electrooxidation in alkaline medium

In situ growth of FeNi alloy nanoflowers on reduced graphene oxide nanosheets and their magnetic properties

Unraveling the Electrocatalytic Activity in HMF Oxidation to FDCA by Fine‐Tuning the Degree of NiOOH Phase Over Ni Nanoparticles Supported on Graphene Oxide