Abstract:The graphical abstract describes the preparation steps of NiCo2O4/T nanocatalysts with subsequent examination of their electrochemical activity using suitable tools. The rational design of noble metal‐free electrocatalysts represents one of the basic stones for fuel cell development. With the exploration of eco‐friendly nanomaterials for the investigated alcohol oxidation process, nickel‐based electrodes have been recognized as the most auspicious anodes with promoted activity and stability. In this work, a series of NiCo2O4 nanoparticles were deposited onto graphite sheets (NiCo2O4/T) introducing varied proportions of cobalt oxide species. Co‐precipitation protocol of the respective metallic hydroxides onto the carbonaceous support was followed with consecutive annealing in an air atmosphere at 400°C. The fabricated mixed metallic oxide nanopowder was physically studied using X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X‐ray analysis (EDX), X‐ray photoelectron spectroscopy (XPS), and selected area electron diffraction (SAED). Uniformly arranged nanoparticles were observed on graphite surface as evidenced by SEM and TEM. The cubic lattice structure of formed NiCo2O4 crystals was also confirmed by XRD through the defined peaks of binary metallic oxides clarifying their successful preparation scheme. The electrocatalytic properties of these NiCo2O4/T nanocatalysts were evaluated for oxidizing ethanol molecules in basic solution. Pronounced oxidation current densities were remarkably measured at NiCo2O4/T electrodes in relation to that at NiO/T. Differing the introduced cobalt oxide content into the synthesized nanocatalyst significantly controlled its catalytic performance. NiCo2O4/T‐20 exhibited the highest activity and stability among the prepared nanomaterials. Much decreased charge transfer resistances were also recorded at this electrode demonstrating its promoted electron transfer characteristics. This work could provide a reasonable route for the simple synthesis of comparable transition metallic oxides with promising attitudes for energy generation purposes.

Fabrication and characterization of NiCu/GO and NiCu/rGO nanocomposites for fuel cell application

Design and Performance of CuNi-rGO and Ag-CuNi-rGO Composite Electrodes for Use in Fuel Cells

High-Loading Cobalt Oxide Coupled with Nitrogen-Doped Graphene for Oxygen Reduction in Anion-Exchange-Membrane Alkaline Fuel Cells

High-Performance Methanol Oxidation via Ni12-Metal8/CNF Catalyst for Fuel Cell Applications

Synthesis and characterization of reduced graphene oxide-iron oxide nanocomposite as a potential fuel cell electrocatalyst

N, S and Transition-Metal Co-Doped Graphene Nanocomposites as High-Performance Catalyst for Glucose Oxidation in a Direct Glucose Alkaline Fuel Cell

Three-component NiO/Fe3O4/rGO nanostructure as an electrode material towards supercapacitor and alcohol electrooxidation

Nanocomposites of NiO/CuO Based MOF with rGO: An Efficient and Robust Electrocatalyst for Methanol Oxidation Reaction in DMFC

Fabrication of interface-engineered Ni/NiO/rGO nanobush for highly efficient and durable oxygen reduction

Composite electrodes with superior catalytic activity in methanol electro-oxidation process fabricated using ternary NiO-CuO-ZnO mixed metal oxides

GO modification with PANI-PpPDA as support material for Pd-Ni and its application for ethanol electrooxidation

Improvement of the performance of hydrazine fuel cells without immobilization of ink catalysts on the membrane: a new electrocatalyst of mixed metal oxides as cathode and nickel foam-based Ni–Co nanoparticles as anode

Outstanding Activity and Durability of Supported NiCo2O4 Nanoparticles for Direct Ethanol Fuel Cells

Synergistic Effect of Graphene and Multi-Walled Carbon Nanotubes Composite Supported Pd Nanocubes on Enhancing Catalytic Activity for Electro-Oxidation of Formic Acid

Fabrication of Composite Material with Pd Nanoparticles and Graphene on Nickel Foam for Its Excellent Electrocatalytic Performance

Fabrication of new nanocomposites based on NiO-MWCNT-sodium dodecyl sulfate in the presence of Gundelia tournefortii extract: application for methanol electrooxidation in alkaline solution

Nitrogen-doped graphene quantum dots as a support for Ni-Au nanoparticles: efficient electrocatalysts for ethanol and formate fuel cells using hydrogen peroxide as oxidant

Facile Fabrication of Nickel Supported on Reduced Graphene Oxide Composite for Oxygen Reduction Reaction

Single Phase PtAg Bimetallic Alloy Nanoparticles Highly Dispersed on Reduced Graphene Oxide for Electrocatalytic Application of Methanol Oxidation Reaction

Pt nanoparticles supported on mesoporous carbon nanocomposites incorporated with Ni or Co nanoparticles for fuel cells

Synthesis, characterization and catalytic activity of rGO supported novel hybrid materials for green fuel production