Abstract:Passive vibration isolation techniques with low-frequency characteristics have been a hot topic in the aerospace field. A hydraulic inertial vibration isolator is a highly effective type of isolator for controlling low-frequency vibrations. It typically consists of a main spring, a minor spring, an inertial mass, and a fluid domain. Due to its multi-domain nature, analyzing the isolation mechanism of this type of isolator is challenging. The bond graph method is employed to establish the dynamic model of the isolator. Subsequently, the state equations of the isolator are derived, and the energy equations of both the mechanical and the fluid parts of the isolator are obtained. Based on this, the energy transfer characteristics between the mechanical and fluid domains inside the isolator under external excitation are discussed. The time-domain response of the forces transmitted to the foundation is analyzed. It is shown that the anti-resonance frequency occurs when the forces transmitted to the foundation generated by the main spring and the fluid pressure are equal to that of the minor spring. To verify the proposed method's correctness, a prototype of the isolator is designed and a carefully designed experiment is conducted. The acceleration transmissibility of the isolator is used to conduct a comparative study. The results show that the theoretical results are in good agreement with the experimental results. To depict the dynamic characteristics of the isolator under large amplitude vibration, the nonlinear dynamic model of the isolator is developed, and the corresponding force transmissibility of the isolator is formulated. The energy flow between the mechanical and the fluid domains under this condition is also analyzed. The results indicate that the energy flow responses exhibit a similar change tendency to the force transmissibility. However, the peak of the energy ratio between the mechanical subsystem and the fluid is the same as the linear condition, suggesting that this value is determined by the amplification ratio of the isolator. This research provides enhanced physical insight to understand the dynamic characteristics of this type of isolator and will help to shorten the design cycle of the isolator.

Geometrically Nonlinear Isolator with Elastic Rings by Using Hilbert Transform. In G. Kerschan (Ed.), Nonlinear Dynamics, Volume 1: Proceedings of the 35th IMAC, A Conference and Exposition on Structural Dynamics

On the Analysis of A Piecewise Nonlinear-Linear Vibration Isolator with High-Static-Low-Dynamic-Stiffness under Base Excitation

Modeling and Analysis of a High-Static-low-dynamic Stiffness Vibration Isolator with Experimental Investigation

Response and Performance of A Nonlinear Vibration Isolator with High-Static-Low-Dynamic-Stiffness under Shock Excitations

Force and displacement transmissibility of a quasi-zero stiffness vibration isolator with geometric nonlinear damping

A Combined Dynamic Analysis Method for Geometrically Nonlinear Vibration Isolators with Elastic Rings

Comparison of the Dynamic Performance of Nonlinear One and Two Degree-Of-Freedom Vibration Isolators with Quasi-Zero Stiffness

Effect of Negative Stiffness Mechanism in a Vibration Isolator with Asymmetric and High-Static-low-dynamic Stiffness

Experimental Study of Vibration Isolation Characteristics of a Geometric Anti-Spring Isolator

Analysis and Experimental Study on Dynamic Characteristics of an Integrated Quasi-Zero Stiffness Isolator

The Bond Graph Modeling and Experimental Verification of a Hydraulic Inertial Vibration Isolator Including Nonlinear Effects

Vibration of Two Beams Connected by Nonlinear Isolators: Analytical and Experimental Study

Static Analysis and Experiment of a Nonlinear Vibration Isolator

Theoretical Analysis and Experimental Identification of a Vibration Isolator with Widely-Variable Stiffness

Shock Isolation Performance of A Nonlinear Isolator Using Euler Buckled Beam As Negative Stiffness Corrector: Theoretical and Experimental Study

Displacement and Force Transmissibility of a High-Static-Low-Dynamic-Stiffness Isolator with Geometric Nonlinear Damping

Characteristic Analysis of a New High-Static-low-dynamic Stiffness Vibration Isolator Based on the Buckling Circular Plate

Study on the Force Transmissibility of Vibration Isolators with Geometric Nonlinear Damping

A Study of a Pendulum-Like Vibration Isolator with Quasi-Zero-Stiffness

Characteristics of a Novel Low-Frequency Isolator

Bio-Inspired Multi-directional Vibration Isolator with Bending Strips