Abstract:Experiment evaluation and mechanism analysis of separation performance are crucial for oily wastewater treatment. In this work, a fluorinated superhydrophobic/superoleophilic (F-SHPB/SOPL) surface was fabricated on a steel mesh substrate by double depositions of SiO2-TiO2 nanoparticles for high-roughness improvement and composite modification of fluorine-alkyl groups for low-energy achievement. Measurements of SEM, XPS, FTIR, laser scanning confocal microscope (LSCM), and excitation-emission matrix (EEM) were carried out for surface property characterization. The oil-water separation performances at the prepared F-SHPB/SOPL surface were investigated from experimental and simulation aspects. Separation tests, flux tests, and anti-contamination tests were performed by experimental methods. The results indicated that the surface showed excellent separation efficiencies (>99.2%) for oil-water mixture and oil-in-water emulsion, high permeate flux (>3000 L·m-2·h-1) for organic oils, and perfect anti-pollution/self-cleaning capacity for liquid and solid contaminations. The interaction energies and interaction distances were measured by ab initio molecular dynamics simulation (AIMD) simulations. With lower interaction energy (Eoil = -456.52∼-1044.22 eV) than that of water molecules (Ewater = -172.73 eV) and shorter distance (Doil = 4.42∼5.13 Å) than that of water molecules (Dwater = 11.49 Å), oil molecules showed higher interaction stability than water molecules on the F-SHPB/SOPL surface. The calculation revealed the essence of the oil-water separation phenomenon. This work not only proposes the fabrication methodology of the SHPB/SOPL material but also elucidates the intermolecular interaction for oil-water separation. The results can provide a fundamental basis for separation operation and removal treatment in industrial and domestic applications.

s for oil – water separation

ater superoleophobic hybrid membranes for e ff ective oil – water separation from oil-contaminated water †

materials for nano fl uid enhanced oil recovery

electrospun nano fi brous membranes for oil – water separation †

Investigation of Oil–Water Separation on an F-SiO 2 /TiO 2 -Based Superhydrophobic/Superoleophilic Surface: Experiment Evaluation and MD Simulation

Investigation of Oil-Water Separation on an F-SiO2/TiO2-Based Superhydrophobic/Superoleophilic Surface: Experiment Evaluation and MD Simulation.

A Novel Superhydrophilic and Underwater Superoleophobic Hydrogel‐Coated Mesh for Oil/Water Separation

Oil‐Water Separation: Oil‐Water Separation: A Gift from the Desert (adv. Mater. Interfaces 7/2016)

Bio-based materials with special wettability for oil-water separation

Recent progress on coal-based liquid oil separation technology

Electrospun Fibers for Oil–water Separation

Superhydrophilic/superoleophobic Shell Powder Coating As a Versatile Platform for Both Oil/water and Oil/oil Separation

Advances in Oil-Water Separation Technologies

Separation Mechanism and Construction of Surfaces with Special Wettability for Oil/Water Separation.

Nanostructure-Based Oil-Water Separation: Mechanism and Status

Study on the Preparation of Special Wettability Nanofiber Membranes and Its Application in Oil-water Separation

An Accessible Superhydrophobic Coating with Nanostructure for Continuously Oil/water Separation

Special Wettable Materials for Oil/Water Separation

Low-temperature carbonization synthesis of carbon-based super-hydrophobic foam for efficient multi-state oil/water separation

Synergistic effect of nano-silica and eco-friendly hydrogel for the cost-effective and highly efficient oil-water separation

A fully bio-based composite coating with mechanical robustness and dual superlyophobicity for efficient two-way oil/water separation