Abstract:A recently-developed large-eddy simulation framework is validated and used to investigate turbulent flow within and above wind farms under neutral conditions. Two different layouts are considered, consisting of thirty wind turbines occupying the same total area and arranged in aligned and staggered configurations, respectively. The subgrid-scale (SGS) turbulent stress is parametrized using a tuning-free Lagrangian scale-dependent dynamic SGS model. The turbine-induced forces are modelled using two types of actuator-disk models: (a) the ‘standard’ actuator-disk model (ADM-NR), which calculates only the thrust force based on one-dimensional momentum theory and distributes it uniformly over the rotor area; and (b) the actuator-disk model with rotation (ADM-R), which uses blade-element momentum theory to calculate the lift and drag forces (that produce both thrust and rotation), and distributes them over the rotor disk based on the local blade and flow characteristics. Validation is performed by comparing simulation results with turbulence measurements collected with hot-wire anemometry inside and above an aligned model wind farm placed in a boundary-layer wind tunnel. In general, the ADM-R model yields improved predictions compared with the ADM-NR in the wakes of all the wind turbines, where including turbine-induced flow rotation and accounting for the non-uniformity of the turbine-induced forces in the ADM-R appear to be important. Another advantage of the ADM-R model is that, unlike the ADM-NR, it does not require a priori specification of the thrust coefficient (which varies within a wind farm). Finally, comparison of simulations of flow through both aligned and staggered wind farms shows important effects of farm layout on the flow structure and wind-turbine performance. For the limited-size wind farms considered in this study, the lateral interaction between cumulated wakes is stronger in the staggered case, which results in a farm wake that is more homogeneous in the spanwise direction, thus resembling more an internal boundary layer. Inside the staggered farm, the relatively longer separation between consecutive downwind turbines allows the wakes to recover more, exposing the turbines to higher local wind speeds (leading to higher turbine efficiency) and lower turbulence intensity levels (leading to lower fatigue loads), compared with the aligned farm. Above the wind farms, the area-averaged velocity profile is found to be logarithmic, with an effective wind-farm aerodynamic roughness that is larger for the staggered case.

Numerical validation of aerodynamics for two in-line model wind turbines using actuator line model and CFD technique

Experimental and numerical validation of a hybrid method for modelling the wake flow of two in-line wind turbines

A Comparative Analysis of Actuator-Based Turbine Structure Parametrizations for High-Fidelity Modeling of Utility-Scale Wind Turbines under Neutral Atmospheric Conditions

Numerical Study of Aerodynamic Performance of a High Solidity H-type Wind Turbine

Numerical simulation of wind turbine wake based on extended k‐epsilon turbulence model coupling with actuator disc considering nacelle and tower

A new class of actuator surface models for wind turbines

Development and Validation of a CFD Technique for the Aerodynamic Analysis of HAWT

Validation of a Mid-Fidelity Numerical Approach for Wind Turbine Aerodynamics Characterization

Aerodynamic Performance and Numerical Validation Study of a Scaled-Down and Full-Scale Wind Turbine Models

Numerical simulation and model prediction of complex wind-turbine wakes

Evaluating the accuracy of the actuator line model against blade element momentum theory in uniform inflow

Numerical investigation of the average wind speed of a single wind turbine and development of a novel three-dimensional multiple wind turbine wake model

Development and assessment of an actuator volume method in rotating frame for predicting the flow-field of horizontal-axis wind turbines

Predictive Capability of an Improved AD/RANS Method for Multiple Wind Turbines and Wind Farm Wakes

On the accuracy of turbulence models for CFD simulations of vertical axis wind turbines

Numerical Simulation on Small Scale Straight-Blade and Twisted-Blade Vertical Axis Wind Turbine

Numerical validation of the dynamic aerodynamic similarity criterion for floating offshore wind turbines under equivalent pitch motions

Modeling the near-wake of a vertical-axis cross-flow turbine with 2-D and 3-D RANS

CFD simulations of aerodynamic characteristics for the three-blade NREL Phase VI wind turbine model

Simulation of Turbulent Flow Inside and Above Wind Farms: Model Validation and Layout Effects

Effects of turbulence modelling in AD/RANS simulations of single wind & tidal turbine wakes and double wake interactions