Abstract:The microstructural evolution of in-situ TiB2 nano-particle reinforced AlZnMgCu composites during hot extrusion was investigated from micro to macro scales by a combination of various techniques, including neutron and synchrotron X-ray diffraction, optical microscopy, scanning and transmission electron microscopy and electron backscatter diffraction (EBSD). The development of microstructure has shown a bimodal grain structure with distinctive spatial distributions of TiB2 particles: the elongated coarse grain structure with smaller dispersed particles and the fine grains mixed with clusters of relatively larger particles. The particle stimulated nucleation occurs at large particle clusters, resulting in recystallized (sub)micron sized fine grains. The dispersed smaller particles are observed to promote dislocation generation and to prohibit recovery. They are shown to reduce the misorientation of low angle grain boundaries due to the pinning effects on independent dislocations, which also lead to the suppression of dynamic recovery and increase of driving force for dynamic recrystallization. Quantitative texture analysis combined with neutron diffraction and EBSD has exhibited the development of a strong 〈111〉 and 〈001〉 dual fiber texture, and both texture volume fractions are changing with the particle content. In addition, the synchrotron diffraction experiments have shown that dislocation density increases with the particle content in both texture components. The microstructure evolution is the result from a complex process of particles/matrix interaction during the deformation and dynamic recrystallization. In comparison with its particle-free alloy counterpart, the thermomechanical response of the composites at high temperature is discussed in terms of aluminum deformation and recrystallization mechanisms combined with nanosized particle effects.

XRD Investigation of Thermal Relaxation Behavior of Microstructure in TiB2/Al Deformation Layer Introduced by Shot Peening

XRD Investigation of Thermostability of TiB2/Al Deformation Layer Introduced by Shot Peening

Investigation for recrystallization behavior of shot peened layer on TiB2/6351Al composite using X-ray diffraction

Microstructures of Shot Peened Layer on TiB2/AI at Elevated Temperatures

Investigation for warm peening of TiB2/Al composite using X-ray diffraction

XRD ANALYSIS OF THE RECRYSTALLIZATION PROCESS OF SHOT PEENED LAYER ON IN SITU TIB2/6351AL COMPOSITE

Thermal Relaxation of Residual Stresses in Shot Peened Surface Layer on Tib2/Al Composite at Elevated Temperatures

The Recrystallization Behavior of Surface Deformation Layer of (tib + TiC)/Ti–6Al–4V Composite During Isothermal Annealing

Investigation of the Hot Deformation Behavior and Microstructure Evolution of TiB2 +tial3/2024al Composite

Microstructural Stability of In-Situ Tib2/Al Composite During Solution Treatment

Impact behavior of in situ TiB<sub>2</sub>/Al composite at various temperatures

Insight into the recrystallization behavior and precipitation reaction of in-situ nano TiB2/AlCuMg composite during heat treatment

Investigation on the Residual Stress and Microstructure of (tib+tic)/ti–6al–4v Composite after Shot Peening

Insight into the recrystallization behavior and precipitation reaction of in-situ nano TiB2/Al Cu Mg composite during heat treatment

Effect of TiB2 particles on thermal deformation behavior and mechanical properties of aluminum alloy

Impact behavior of in situ TiB 2 /Al composite at various temperatures

Effects of Nanosized Particles on Microstructure and Mechanical Properties of an Aged In-Situ TiB2/Al-Cu-Li Composite

Multi-scale Study of Microstructure Evolution in Hot Extruded Nano-Sized TiB2 Particle Reinforced Aluminum Composites

Effect of shot peening on surface mechanical properties of TiB 2 /Al composite

Microstructural evolution and mechanical properties of cast high-Li-content TiB 2 /Al-Li-Cu composite during heat treatment

An Investigation of Microstructural Evolution, Tensile Properties and Work-Hardening Behavior of Nanosized TiB2/Al-Cu-Mn Composites