Detection of Shocks Generated by the Irradiation of Nanosecond Intense Pulsed Ion Beam and Electron Beam 1

Xiaoyun Le,Xiaoping Zhou,Sha Yan,Zhijian Liu,Weijiang Zhao

2006-01-01

Abstract:When irradiated by intense pulsed ion beam (IPIB) or intense pulsed electron beam (IPEB), shocks will be formed. Since a pulse duration of IPIB or IPEB is only about 50 ns or shorter, it’s very difficult to catch wave signals in such a short time. In this paper,a detecting system was designed and manufactured carefully. A 100 μm polyvinylidene fluoride (PVDF) film was chosen as a piezoelectric probe. Electric charges are delivered and are proportional to the stress applied on PVDF film. As the number of charges is measured, we could know the value of the stress applied. All probe system (including cables) was shielded by aluminum and copper sheath. Because there was an intensive electromagnetic field affecting detecting system, we use two layers of shielding sheath for the whole system trying to get minimum noisy signals. With this system, shocks, induced by IPIB and IPEB irradiations, were caught at the backside of metal target successfully. The thicknesses of our sample were 1mm and 2mm respectively. Wave profiles were caught and record by oscilloscope of model TDS2024 (200MHz, 2Gs) and TDS3052B (500MHz, 5Gs). Experimental results have shown in good accordance with our theoretical calculations.