Abstract:Background Safe implementation and translation of FLASH radiotherapy to the clinic requirehs development of beam monitoring devices capable of high temporal resolution with wide dynamic ranges. Ideal detectors should be able to monitor LINAC pulses, withstand high doses and dose rates, and provide information about the beam output, energy/range, and profile. Purpose Two novel detectors have been designed and tested for ultra‐high dose‐rate (UHDR) monitoring: a multilayer nano‐structured 3‐layer high‐energy‐current (HEC3) detector, and a segmented large area, 4‐section flat (S4) detector with the goal of exploring their properties for a future combined design. Methods A Novalis‐TX LINAC was converted to produce a 10 MeV electron‐FLASH beam. Pulses were monitored using both HEC3 and S4 detectors. The HEC3 detector structure consisted of three electrode layers separated by a nanoporous aerogel (Aero): Al(50 μm)–Aero(100 μm)–Ta(10 μm)–Aero(100 μm)–Al(50 μm). The S4 structure was comprised of three layers: Cu(100 nm)–air(1 mm)–Al(100 nm) with contact potential for charge collection. Both detectors are self‐powered as they do not require an external voltage bias for charge collection. The beam was also characterized using a photodiode, Gafchromic EBT‐XD Film, OSLDs, and an Advanced Markus Chamber. Results The electron‐FLASH beam displayed a Gaussian‐like profile with 15 cm FWHM at isocenter. Electron‐FLASH dose rates up to an average of 260 Gy/s were measured on the surface of a solid water phantom at isocenter with an instantaneous dose rate of 1.8 × 105 Gy/s and a dose per pulse of up to 1 Gy/pulse. Both HEC3 and S4 detectors could record individual pulses for repetition rates of 360 Hz with a 4 μs pulse‐width. The HEC3 detector signal increased linearly with dose, MU, number of pulses, and dose rate up to 850 Gy/s with no loss of functionality at high doses or dose rates. The S4 detector showed linearity with MU and number of pulses at each of the four channels independently showing potential for spatial information and steering but lacked dose rate independence. Conclusions Two novel detectors, HEC3 and S4, successfully measured electron‐FLASH pulses and hence can be considered capable of electron‐FLASH beam monitoring in different capacities. HEC3 detector technology is suitable for monitoring high‐dose and UHDR beams with high temporal resolution required for pulse counting. We envision the combination of the HEC3 internal structure with the S4 piece‐wise design for real‐time monitoring of the temporal structure, spatial profiles, energy, and dosimetric properties of UHDR beams.

Electromagnetic pulse protective shielding for digital x-ray detectors

Gas detectors for x-ray lasers

Study of X-ray radiation damage in the AGIPD sensor for the European XFEL

Pulsed beam monitoring for electron FLASH

Plastic scintillator dosimetry of ultrahigh dose-rate 200 MeV electrons at CLEAR

Design of a Talbot phase-contrast microscopy imaging system with a digital detector for laser-driven X-ray backlighter sources

Performance of an LPD prototype detector at MHz frame rates under Synchrotron and FEL radiation

Detector Damage at X-Ray Free-Electron Laser Sources

Mitigation of electromagnetic pulses interfering with Thomson parabola ion spectrometers at XG-III laser facility

Design and First Tests of a Radiation-Hard Pixel Sensor for the European X-Ray Free-Electron Laser

Real-time bremsstrahlung detector as a monitoring tool for laser–plasma proton acceleration

A Diamond-Based Dose-per-Pulse X-ray Detector for Radiation Therapy

Photomultipliers as High Rate Radiation-Resistant In-Situ Sensors in Future Experiments

Gas gun shock experiments with single-pulse x-ray phase contrast imaging and diffraction at the Advanced Photon Source

Time and position sensitive single photon detector for scintillator read-out

Converting existing optical detectors into fast x-ray detectors

Development of Gated Fiber Detectors for Laser-Induced Strong Electromagnetic Pulse Environments

Digital FPGA-based processing of pulses of gas-filled gamma-radiation detector for acoustic noise suppression

Status of detector development for the European XFEL

Rapid detection of incipient foil failure and remediation for longevity in repetitively pulsed, electron-beam-pumped excimer lasers for fusion research

X-ray Dose Rate and Spectral Measurements during Ultrafast Laser Machining Using a Calibrated (High-Sensitivity) Novel X-ray Detector