Abstract:The possibility of using lasers to achieve previously unobtainable states of matter in the laboratory gained much attention following the demonstration of the first pulsed laser in 1960. In the following few years there was plenty research activity as attempts were made to increase the peak power and focused intensity in order to reach extreme conditions within the laboratory. Laser-acceleration technology is rapidly developing. Petawatt class lasers have been constructed for specific research activities, including particle acceleration, inertial confinement fusion and radiation therapy, and for secondary source generation (X rays, electrons, protons, neutrons and ions). As a new source of ionizing radiation, dose measurement in ultra-intense and ultra-short laser facilities is of great value for radiation protection of the environment, occupational staff and shielding design in laser device design stage. Owing to the pulsed and mixed characteristics of radiation field around the laser facility, it is really challenging to accurately measure the dose equivalent induced by bremsstrahlung photon in the target chamber of the laser facility. Moreover, the rationality of dose assessment model needs more experimental data and to be further verified. To reach this point, the Monte-Carlo program FLUKA was employed to characterize the radiation filed distribution. Firstly, a complete and thorough target chamber module was established according to the XG-Ⅲ geometry parameter and material composition. The in-chamber and out-chamber dose distribution were then calculated and analyzed based on the existing theoretical model of electron source term and typical experimental conditions. The electron energy distribution, characteristic electron temperature, scaling laws and laser-to-energy conversion efficiency were introduced. Secondly, the typical electron spectrum was divided into four intervals. The portion of different energy intervals to the total equivalent dose was determined. Thirdly, a bremsstrahlung photon dose equivalent measuring module was designed and optimized for ultra-intense and ultra-short laser facilities. The simulation results indicate that: 1) The electron dose equivalent is higher than the bremsstrahlung photons both inside and outside the target chamber; 2) The dose equivalent contribution of 0.15 MeV electron energy interval to the total energy range is dominant, and the module was design based on the conclusion; 3) The designed module mainly consists of PMMA and metallic shielding material. With this approach, the module can reduce the electron dose equivalent to 0.3% and photon dose equivalent to 69.1%. The dose ratio of electron to photon is about 128%. In addition, 5% of the total photon dose is contributed by the occurrence of bremsstrahlung of highenergy electron in PMMA.

Real-time bremsstrahlung detector as a monitoring tool for laser–plasma proton acceleration

Proton Bragg curve and energy reconstruction using an online scintillator stack detector

Spectral Tomographic Analysis of Bremsstrahlung X-Rays Generated in A Laser-Produced Plasma

Bremsstrahlung Dose Yield for High-Intensity Short-Pulse Laser-Solid Experiments

Absolute energy-dependent scintillating screen calibration for real-time detection of laser-accelerated proton bunches

Design of a Semiconductor-Based Proton Spectrometer for Laser-Driven Sources Applications

Directional-sensitive wide field-of-view monitoring of high-intensity proton beams by spectral tracking of scattered particles with scattering foil and miniaturized radiation camera

Visible proton Bragg curve imaging by colour centre photoluminescence in radiation detectors based on lithium fluoride films on silica

Cross Section Measurements of 27al(γ, X)24na Reactions As Monitors for Laser-Driven Bremsstrahlung Γ-Ray

A new energy spectrum reconstruction method for Time-Of-Flight diagnostics of high-energy laser-driven protons

Spatial and Spectral Measurement of Laser-Driven Protons Through Radioactivation

A Platform for Ultra-fast Proton Probing of Matter in Extreme Conditions

Neutron dose assessment in laser-generated ultra-short pulsed fields

Superintense laser-driven photon activation analysis

Novel Bragg peak characterization method using proton flux measurements on plastic scintillators

Study on Photon Dose of Ultra-intense and Ultra-short Laser Facility Based on Fully Monte-Carlo Simulation

Dose estimation and shielding calculation for X ray hazard at high intensity laser facilities

Betatron Radiation and Bremsstrahlung in the Interaction of Intense Laser Pulse with Solid Target

Betatron emission as a diagnostic for injection and acceleration mechanisms in laser-plasma accelerators

Automated control and optimisation of laser driven ion acceleration

A Laser-Driven Nanosecond Proton Source for Radiobiological Studies