Abstract:From the stripping points, the high intensity proton beam of a compact cyclotron travels through the fringe field area of the machine to the combination magnet. Starting from there the beams with various energy is transferred to the switching magnet for distribution to the beam line targets. In the design of the extraction and transport system for the compact proton cyclotron facilities, such as the 70MeV in France and the 100MeV in China, the space charge effect as the beam crosses the fringe field has not been previously considered; neither has the impact on transverse beam envelope coupled from the longitudinal direction. Those have been concerned much more with the higher beam-power because of the beam loss problem. In this paper, based on the mapping data of 70MeV cyclotron including the fringe field by BEST Cyclotron Inc (BEST) and combination magnet field by China Institute of Atomic Energy (CIAE), the beam extraction and transport are investigated for the 70MeV cyclotron used on the SPES project at Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Legnaro (INFN–LNL). The study includes the space charge effect and longitudinal and transverse coupling mentioned above, as well as the matching of beam optics using the beam line for medical isotope production as an example. In addition, the designs of the ±45° switching magnets and the 60° bending magnet for the extracted beam with the energy from 35MeV to 70MeV have been made. Parts of the construction and field measurements of those magnets have been done as well. The current result shows that, the design considers the complexity of the compact cyclotron extraction area and fits the requirements of the extraction and transport for high intensity proton beam, especially at mA intensity levels.

Phase space manipulations in modern accelerators ∗

High Intensity Proton Beam Transportation Through Fringe Field of 70 MeV Compact Cyclotron to Beam Line Targets

Physics design of phase and energy adjustment for heavy ion beam of the same mass with two-charge state on BISOL

ON SOME IMPORTANT PROBLEMS OF THE PHASE ADJUSTED FOCUSING LASER ACCELERATOR

Manipulation of annular electron beams in plasmas

Physics of Phase Space Matching for Staging Plasma and Traditional Accelerator Components Using Longitudinally Tailored Plasma Profiles

Manipulating Orbital Angular Momenta of Photons by Transformation Media

Beam by design: Laser manipulation of electrons in modern accelerators

Four-dimensional Phase Space Measurement Using Multiple Two-Dimensional Profiles

Phase-Space Dynamics of Ionization Injection in Plasma-Based Accelerators

Four-Dimensional Phase-Space Reconstruction of Flat and Magnetized Beams Using Neural Networks and Differentiable Simulations

Design approach for modern high-current, radio-frequency quadrupole accelerators with low emittance transfer

An Integrated Multi-Physics Optimization Framework for Particle Accelerator Design

Beamline Analysis for a Laser-Driven Proton Therapy Accelerator Using Superconducting Bends

Beam-Shaping Application in Laser Heat Processing

Beam distribution homogenization design for laser-driven proton therapy accelerator

Matched phase sweep method for the optimization of bunching factor in dual rf systems of high-intensity hadron synchrotrons

Longitudinal Phase Space Manipulation with Planar Corrugated Wakefield Structures

The Beam Mismatches in the RFQ Dynamics Design

Start-to-end Modeling and Transmission Efficiency Optimization for a Cyclotron-Based Proton Therapy Beamline

Three-dimensional manipulation of electron beam phase space for seeding soft x-ray free-electron lasers