Abstract:Stiffeners play a vital role in strengthening thin panels in a wide range of engineering constructions by reducing additional structural weight. However, these structures are vulnerable to issues such as interlayer delamination or skin-stiffener interfacial debonding due to high stress levels developed from external environmental conditions and operational loadings. In contrast, ultrasonic-guided wave (UGW) techniques exhibit an efficient and precise approach for monitoring discontinuities or damages in composite structures. There is a lack of research on understanding the characteristics of the interaction between UGW and interfacial debonding when in-plane edge loading and environmental factors are simultaneously taken into account. Therefore, this study is motivated by the need to develop a multiphysics numerical model which employs a commercially available finite element software, COMSOL Multiphysics®, to simulate UGW propagation in a stiffened composite plate with debonding at the plate-stiffener interface through a piezoelectric transducer under the combined influence of in-plane edge load and hygrothermal environment. The stiffened plate and piezoelectric patches are modelled with the tetrahedral element, and the bottom surface of the attached stiffener has a through-width 0.1 mm deep groove simulated for debonding. The developed FE model is validated against the results of the conducted experiments and those found in the available literature through the correlation coefficient. Further, the study conducts a comprehensive parametric investigation on stiffened cross-ply (0/90/0) laminated plates, considering variations in debonding size, in-plane load, and hygrothermal load intensity through the excitation of A0 mode. The acquired response is processed to compare the peak amplitude of various modes and energy of the waveform. Additionally, statistical indices such as normalised correlation moment (NCM) and variance of the continuous wavelet transform (CWT) peak are estimated to understand the impact of various parameters on waveform. The results show that the presence of a 90° lamina in the cross-ply laminate generates a low amplitude S0 mode in the scattered response. Moreover, a mode conversion from A0 to S0 mode is observed due to perfect bonding between the plate and the stiffener, providing insights into the bonding state in the panel. Furthermore, it is found that the magnitude of the in-plane loading marginally affects the peak amplitude of various modes in the scattered response. Additionally, when temperature intensity rises, the energy and amplitude of the UGW signals acquired through piezoelectric patches positioned in a direct line with the actuator gradually increase. The NCM value enhances with debonding regardless of exposed hygrothermal condition and reduces with increasing temperature intensity. In addition, the variance of the CWT peak reduces with debonding. The findings of this research are expected to be helpful for the development of efficient algorithms for detecting damages for structural health monitoring of stiffened composite panels.

Propagation Characteristics of Stress Wave in Stiffened Composite Structure during Low-velocity Impact

Experimental Study on Stress Wave Propagation in Ultra High Toughness Cementitious Composites

Simulation research on impact damages under low velocities of composite grid structures for aircraft wing

Damage monitoring of composite material structures based on stress wave analysis

Impact Damage Detection in Composite Laminates Using PVDF and PZT Sensor Signals

A Novel Methodology to Research the Residual Compressive Mechanical Properties of Composite Stiffened Panel after Low Velocity Impact Based on Quantification Damage Simulation

An Experimental and Numerical Study on Impact and Compression after Impact of Stiffened Composite Panels

Investigation on damage behavior of composite T-shaped stiffened panels under compression after multi-point impact considering impact positions

Finite Element Simulation and Piezoelectric Sensor Array-Driven Two-Stage Impact Location on Composite Structures

Effect of impact position on the mechanical response and viscoelastic behavior of double‐blade composite stiffened structures

Ballistic impact testing and analysis of triaxial braided composite fan case material

Finite element analysis on impact response and damage mechanism of composite laminates under single and repeated low-velocity impact

NUMERICAL SIMULATION ON IMPACT MONITORING OF COMPOSITE STRUCTURES BASED ON PIEZOELECTRIC SENSORS

Fast stress wave attenuation in bioinspired composites with distributed soft particles modulating hard matrices

Low‐velocity impact damage and compression after impact behavior of CF/PEEK thermoplastic composite laminates

On damage behavior and stability of composite T-shaped stiffened panels under compression after impact considering impact locations

Flexible piezoelectric composite sensor for impact monitoring of curved structures

Investigation on manufacturing and low-velocity impact performance of all-composite sandwich structure with S-type foldcore

Damage Detection Method Based on Lamb Waves for Stiffened Composite Panels

Experimental and numerical investigations on the dynamic response of woven carbon fiber reinforced thick composite laminates under low-velocity impact

Interaction of ultrasonic guided waves with interfacial debonding in a stiffened composite plate under variable temperature and operational conditions