Abstract:Single-crystal α-Al₂O₃ fibres can be utilized as a novel reinforcement in high-temperature composites owing to their high elastic modulus, chemical and thermal stability. Unlike non-oxide fibres and polycrystalline alumina fibres, high-temperature oxidation and polycrystalline particles boundary growth will not occur for single-crystal α-Al₂O₃ fibres. In this work, single-crystal α-Al₂O₃ whiskers and Al₂O₃ particles synergistic reinforced copper-graphite composites were fabricated by mechanical alloying and hot isostatic pressing techniques. The phase compositions, microstructures, and fracture morphologies of the composites were investigated using X-ray diffraction, a scanning electron microscope equipped with an X-ray energy-dispersive spectrometer (EDS), an electron probe microscopic analysis equipped with wavelength-dispersive spectrometer, and a transmission electron microscope equipped with EDS. The mechanical properties have been measured by a micro-hardness tester and electronic universal testing machine. The results show that the reinforcements were unevenly distributed in the matrix with the increase of their content and there were some micro-cracks located at the interface between the reinforcement and the matrix. With the increase of the Al₂O₃ whisker content, the compressive strength of the composites first increased and then decreased, while the hardness decreased. The fracture and strengthening mechanisms of the composite materials were explored on the basis of the structure and composition of the composites through the formation and function of the interface. The main strengthening mechanism in the composites was fine grain strengthening and solid solution strengthening. The fracture type of the composites was brittle fracture.

High Thermal Conductivity and Low Thermal Expansion Coefficient of Isotropic Graphite-Reinforced Aluminum Matrix Composites Prepared by in Situ Curing of Silicon Aerogel

Fabrication of Nanocrystalline Zro2 Particle Reinforced Aluminum Alloy Composite by Squeeze Casting Route

Fabrication of Graphite Film/aluminum Composites by Vacuum Hot Pressing: Process Optimization and Thermal Conductivity

Composites of aluminum alloy and magnesium alloy with graphite showing low thermal expansion and high specific thermal conductivity

Fabrication and Thermal Conductivity of Copper Coated Graphite Film/aluminum Composites for Effective Thermal Management

Three Dimensional AlN Skeleton-Reinforced Highly Oriented Graphite Flake Composites with Excellent Mechanical and Thermophysical Properties

Synergistic enhancing effect of tungsten-copper coated graphite flakes and aluminum nitride nanoparticles on microstructure, mechanical and thermal properties of copper matrix composites

The Roles of Geometry and Topology Structures of Graphite Fillers on Thermal Conductivity of the Graphite/aluminum Composites

Fabrication, mechanical and thermal properties of tungsten-copper coated graphite flakes reinforced copper matrix composites

Carbon/Aluminum Composites with High Thermal Conductivity for Thermal Management Applications

Deformation behavior of graphite and its effect on microstructure and thermal properties of aluminum/graphite composites

Copper coated graphene reinforced aluminum composites with enhanced mechanical strength and conductivity

High-performance aluminum/carbon composite material and preparation method thereof

Thermal conductivity and mechanical properties of graphite/Mg composite with a super-nano CaCO3 interfacial layer

A novel approach for in-situ preparation of copper/graphene composite with high hardness and high electrical conductivity

A facile treatment of graphite as a reinforcement for Al‐based nanostructured composite

Investigation of the Microstructure and Mechanical Properties of Copper-Graphite Composites Reinforced with Single-Crystal α-Al2O3 Fibres by Hot Isostatic Pressing

Properties of Hybrid-Reinforced Aluminum Matrix Composites for Precision Instruments

Graphite film/aluminum laminate composites with ultrahigh thermal conductivity for thermal management applications

Fabrication, Interface Characterization and Modeling of Oriented Graphite Flakes/Si/Al Composites for Thermal Management Applications

Microstructural characterization of Al4C3 in aluminum–graphite composite prepared by electron-beam melting