Abstract:In order to improve airfoil performance under different flight conditions and to make the performance insensitive to off-design condition at the same time, a multi-objective optimization approach considering robust design has been developed and applied to airfoil design. Non-uniform rational B-spline (NURBS) representation is adopted in airfoil design process, control points and related weights around airfoil are used as design variables. Two airfoil representation cases show that the NURBS method can get airfoil geometry with max geometry error less than 0.0019. By using six-sigma robust approach in multi-objective airfoil design, each sub-objective function of the problem has robustness property. By adopting multi-objective genetic algorithm that is based on non-dominated sorting, a set of non-dominated airfoil solutions with robustness can be obtained in the design. The optimum robust airfoil can be traded off and selected in these non-dominated solutions by design tendency. By using the above methods, a multi-objective robust optimization was conducted for NASA SC0712 airfoil. After performing robust airfoil optimization, the mean value of drag coefficient at Ma0.7–0.8 and the mean value of lift coefficient at post stall regime (Ma0.3) have been improved by 12.2% and 25.4%. By comparing the aerodynamic force coefficients of optimization result, it shows that: different from single robust airfoil design which just improves the property of drag divergence at Ma0.7–0.8, multi-objective robust design can improve both the drag divergence property at Ma0.7–0.8 and stall property at low speed. The design cases show that the multi-objective robust design method makes the airfoil performance robust under different off-design conditions.

A complex method for numerical optimization on airfoil

Aerodynamic Design Optimization by Using a Continuous Adjoint Method

Multipoint Design Optimization of a Transonic Compressor Blade by Using an Adjoint Method

Multi-Objective Design Optimization of a Transonic Compressor Rotor Using an Adjoint Equation Method

Multiobjective Shape Optimization of A Hypersonic Lifting Body Using A Correlation-Based Transition Model

Optimization Design of a Turbine Blade to Reduce Secondary Flow Loss Using a Viscous Adjoint Method

Optimization Design for Supersonic Inlet Structure Parameter

Flow Reconstructions and Aerodynamic Shape Optimization of Turbomachinery Blades by POD-based Hybrid Models

A throughflow-based optimization method for multi-stage axial compressor

Particle Swarm Optimization of Aerodynamic Shapes with Nonuniform Shape Parameter–Based Radial Basis Function

Aerodynamic shape optimization using design-variables-screening method

Wing/Engine Integrated Optimization Based on Navier-Stokes Equations

Integrated Design of Aerodynamics, Structures, Propulsion, and Control Based on the Multidisciplinary Optimization Method

A Study of Multi-Objective Aerodynamic Optimization Design for Variable Camber Airfoils and High Lift Devices

Multi-objective robust airfoil optimization based on non-uniform rational B-spline (NURBS) representation

Optimized design of wind turbine airfoil aerodynamic performance and structural strength based on surrogate model

Integral Airfoil Generation of Multi-rotor Aircraft Based on Optimization of Upper Wing Contour and CFD Simulation

Supercritical natural laminar flow airfoil optimization for regional aircraft wing design

A mid-range approximation method assisted by trust region strategy for aerodynamic shape optimization

Aerodynamic airfoil design using the Euler equations based on the dynamic evolution method and the control theory

Inverse design optimization of the compressor cascade airfoil assisted by active subspace approach