Abstract:The gas-solid flows in a two-dimensional downer of 10 m in height and 0.10 m in width were simulated using a CFD-DEM method, where the motion of particles was modeled by discrete element method (DEM) and the gas flow was described by Navier-Stokes equations. The simulations revealed a rich variety of developing flow structures in the downer under different operating conditions. The two-phase flow development can be clearly characterized by the micro-scale particle distributions in the downer. Near the inlet, the particle distribution is dominated by the distributor design. Then, the particles disperse in the column, forming a homogeneous transit region. After that clusters start to form and modulate the gas-solid flow field till the fully-developed state. The particle-scale simulation disclosed that the clusters are composed of loosely collected particles, and these particles have the same flow direction as the bulk flow so that no particle backmixing can be observed. As the particles in the downer have the tendency to maintain the inertia, the capability of lateral transfer of particles is relatively weak, which was illustrated by tracking the movement of the single particles and clusters. The simulations of the inlet effect on the hydrodynamics in the downer showed that the gas-solid flow structure and the mixing behavior are sensitive to the inlet design. An inappropriate design or operation would probably cause the undesired flow phenomena such as the wide distribution of residence times. The time-averaged hydrodynamics based on the transient simulations showed good agreement with the experimental findings in the literature. The simulation based on the CFD-DEM coupled approach provides a theoretical way to comprehensively understand the physics at micro- to macro-scales in the co-currently downward gas-solid flows. (c) 2009 Elsevier B.V. All rights reserved.

Cfd-dem study of the gas-solids flows in a fluidized bed with an immersed cylinder : comparison of pseudo-2 d and 3 d models

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Effect of Bed Thickness on a Pseudo 2D Gas-Solid Fluidized Bed Turbulent Flow Structures and Dynamics

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

Numerical Simulation of Two-Dimensional Spouted Bed with Draft Plates by Discrete Element Method

CFD–DEM Study of Mixing and Dispersion Behaviors of Solid Phase in a Bubbling Fluidized Bed

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

CFD-DEM study of impacts of the porous distributor medium on fluidization characteristics of a 2D-fluidized bed

Numerical study of gas–solid flow characteristics of cylindrical fluidized beds based on coarse‐grained CFD‐DEM method

CFD-DEM Simulation of Fluidization of Polyhedral Particles in a Fluidized Bed

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

CFD-DEM Modeling of Rod-Like Particles in a Fluidized Bed with Complex Geometry

CFD-DEM Simulation of Flow and Mixing Behavior in Downers with Different Entrance Structures

Numerical Simulation of Hydrodynamics in Downers Using a CFD–DEM Coupled Approach

DEM-CFD Analysis of Fluid Flow in Packed Bed Under the Small Column-to-Particle-Diameter Ratios

Computational Evaluation of Depth Effect on the Hydrodynamics of Slot-Rectangular Spouted Bed

CFD‐DEM Simulation of the Spout–annulus Interaction in a 3D Spouted Bed with a Conical Base

Discrete Element Simulation of the Hydrodynamics in A 3d Spouted Bed: Influence of Tube Configuration