Abstract:Copper (Cu) particle sintering is widely regarded as one of the most ideal interconnect technologies for wide band gap semiconductors owing to its potential for low-temperature curing while withstanding a higher working temperature. Nevertheless, the strict requirements for sintering conditions and high costs limit the widespread application of Cu sintering technology. In this paper, a simple vehicle was introduced into Cu paste formulation to achieve an effective sinter bonding even using commercially available sub-micron or even micrometer Cu particles (C-Cu particles) with the in-situ generation of composite Cu particles. This innovative vehicle comprises Cu salt, a combination of capping agents and reducing agents. The addition of the hybrid capping agent binds Cu atoms to the surface of the C-Cu particles and allows the generated Cu particles (G-Cu particles) produced from the vehicle to grow on their surface, resulting in the in-situ generation of composite Cu particles. Based on the in-situ generated composite Cu particles, sintering experiments were conducted at designated temperatures (200 °C, 225 °C, 250 °C) for various durations (3 min, 5 min, 10 min) in a N 2 atmosphere under different pressures (10 MPa, 15 MPa, 20 MPa). A reliable Cu sintered joint with a high shear strength of 41.3 MPa can be achieved at a low temperature (200 °C) using 500 nm C-Cu particles. Moreover, the joints sintered with large size (>3 μm) particles at 250 °C could also reach 43.3 MPa. The in-situ generated composite Cu particles accomplish the transformation of low-energy interfaces of C-Cu/C-Cu to high-energy interfaces of G-Cu/G-Cu, which in turn facilitates low-temperature sintered connection of C-Cu particles and reliable sintered joints formed of large size C-Cu particles. These findings improve the feasibility of Cu sinter bonding in practical applications.

Fabrication of High-Strength Cu–Cu Joint by Low-Temperature Sintering Micron–nano Cu Composite Paste

Facile Preparation of Cu Micro-Nano Composite Particle Paste for Low Temperature Bonding

Highly Conductive Cu-Cu Joint Formation by Low-Temperature Sintering of Formic Acid-Treated Cu Nanoparticles

Superb Sinterability of the Cu Paste Consisting of Bimodal Size Distribution Cu Nanoparticles for Low-Temperature and Pressureless Sintering of Large-Area Die Attachment and the Sintering Mechanism

Formation of Cu-Cu Joints with High Shear Strength and High Reliability in Air Atmosphere

Low-Temperature and Low-Pressure Cu–Cu Bonding by Highly Sinterable Cu Nanoparticle Paste

Facile Preparation of Cu-Ag Micro-Nano Composite Paste for High Power Device Packaging

High performance Cu sintering joint for power devices enabled by in-situ generation of Cu particles with multi-level hierarchical structures

Cu-Cu joint formation by low-temperature sintering of self-reducible Cu nanoparticle paste under ambient condition

Large-area Die Attachment and the Surface Finish Effect on Bonding Strength of Joints in High-power Electronics Using a Low-temperature Sinterable Cu Nanoparticle Paste

Sintering Mechanism of Bimodal-Sized Cu Nanoparticle Paste for Power Electronics Packaging

A highly reliable die bonding approach for high power devices by low temperature pressureless sintering using a novel Cu nanoparticle paste

Effect of liquid metal enhanced Cu Nano/Micro particle paste on performance of Cu-Cu joints

Fabrication and Sintering Behavior of Nano Cu–Ag Composite Paste for High-Power Device

Superior Strength and Strengthening Mechanism of Die Attachment Joints by Using Bimodal-Sized Cu Nanoparticle Paste Capable of Low-Temperature Pressureless Sintering

Low temperature nanojoining of silver–copper nanopaste as die attach material for high temperature packaging

Rapid Formation of Cu–Cu Joints with High Shear Strength Using Multiple-Flocculated Ag Nanoparticle Paste

Low-temperature and Low-Pressure Cu-Cu Bonding by Pure Cu Nanosolder Paste for Wafer-Level Packaging

A low cost multi-shapes designed sintering composite paste: A strengthening method of sintered interconnect for die attach in high temperature applications

Enhanced shear strength and microstructure of Cu–Cu interconnection by low-temperature sintering of Cu nanoparticles

Synthesis and Characterization of Highly-Dispersed Copper Submicron Particles for Low Temperature Sintering Joints