Abstract:In robotic arm-based noncooperative spacecraft-capture missions, the gripper of the robotic arm collides with the target's surface and graspable structure. The former can cause the graspable structure to collide with the gripper multiple times or escape from the gripper. The adverse of the latter is that the momentum transfer can result in a sudden change in motion of the service spacecraft. If the service spacecraft is required to be in the desired configuration, the control system needs to generate a considerable control output. This paper designs a new capturing strategy to avoid these adverse phenomena, which divides the capture process into two phases: colliding and locking. In the colliding phase, the gripper will actively contact the target's surface and should maintain the contact, i.e., form a stable contact. This study proposes an improved damping-control scheme for forming a stable contact to realize this objective. Unlike the existing control scheme, this one allows the base of the service spacecraft to move, which helps to reduce the control force acting on the base, saving fuel. After establishing the stable contact, the gripper begins to close. The locking phase starts after forming a force-closure grasp. In this phase, the gripper will continue to close in a controlled manner. However, the states of the service spacecraft's base and robotic arm should transform from the controlled state to the uncontrolled state. A significant benefit is that the control system does not need to produce large control outputs to resist the colliding impact. Meanwhile, since the service spacecraft has a large inertia, the momentum transfer caused by the collision does not cause significant changes in its configuration. Numerical simulations are performed to evaluate the validity of the proposed control scheme and capturing strategy at the end of this paper. The results indicate that the proposals allow the space robot to grasp the target spacecraft with less control cost.

Combined Spacecraft Stabilization Control after Multiple Impacts During the Capture of a Tumbling Target by a Space Robot

Stabilization Control for Spacecraft-manipulator System After Capturing Tumbling Target

Impedance Control For Stabilizing The Coupled System During Tumbling Target Capturing

Anti-impact Tension Control Strategy for the Space-Tethered Combination after Target Capture

Coordinated Stabilization for Space Robot after Capturing a Noncooperative Target with Large Inertia

A collision control strategy for detumbling a non-cooperative spacecraft by a robotic arm

Adaptive detumbling control of dual-arm space robot after capturing non-cooperative target

A strategy to decelerate and capture a spinning object by a dual-arm space robot

Hybrid Control Scheme for Grasping a Non-Cooperative Tumbling Satellite

An Optimal Trajectory Planning Method for Stabilization of Coupled Space Robotic System after Capturing

Dynamics and control of capture of a floating rigid body by a spacecraft robotic arm

Predictive motion control for autonomous capture of a tumbling target with a space manipulator

A new strategy for capturing a noncooperative spacecraft by a robotic arm

The Fuzzy Neural Network Control Scheme with H∞ Tracking Characteristic of Space Robot System with Dual-Arm after Capturing a Spin Spacecraft.

Adaptive optimal concurrent control for detumbling space non-cooperative target via multipoint repeated contact

Contact dynamics and control of a space robot capturing a tumbling object

Modeling and Planning of a Space Robot for Capturing Tumbling Target by Approaching the Dynamic Closest Point

Impedance-Sliding Mode Control With Force Constraints for Space Robots Capturing Non-Cooperative Objects

Dynamics and cooperative control of a space robot team after capturing a common target

Control of a Space Manipulator Capturing a Rotating Object in the Three-dimensional Space.

Coordinated control of dual-arm robot on space structure for capturing space targets