Abstract:As a viable wastewater treatment and energy recovery technology, microbial fuel cell (MFC) requires more research with regard to the simultaneous achievement of high-quality effluent and high power generation. In this study, a novel flow-through carbon-based composite anode configuration is proposed, which combines the carbon cloth of two-dimensional anode with wooden granular activated carbon of three-dimensional anode. The proposed configuration enhances the performance of power production and chemical oxygen demand degradation by promoting the mass transfer, reducing internal resistance and increasing bioburden. Microbial fuel cell with the composite anode exhibited the highest maximum power density (1300 +/- 50 mW m(-2)) and the highest chemical oxygen demand removal rate constant (0.155 +/- 0.007 h(-1)) compared with the microbial fuel cell using the carbon cloth anode (1136 +/- 46 mW m(-2) and 0.072 +/- 0.008 h(-1)) or the wooden granular activated carbon anode (1045 +/- 32 mW m(-2) and 0.129 +/- 0.009 h(-1)). Meanwhile, at a lower chemical oxygen demand concentration (about 48 mg L-1), the microbial fuel cell with the composite anode maintained a current density of 2.4 A m(-2), which is 18% higher than the wooden granular activated carbon anode (2.04 A m(-2)) and 400% higher than the carbon cloth anode (0.48 A m(-2)). The cyclic voltammetry and electrochemical impedance spectroscopy tests confirmed that the composite anodes displayed better electrochemical performance. Improving the flow rate and reducing the external resistance could effectively enhance the power production and chemical oxygen demand removal performance of microbial fuel cells, while the computational fluid dynamics simulation intuitively demonstrated the positive effect of the composite anode on chemical oxygen demand degradation. These results suggest that the flow-through composite anode provides a feasible strategy to simultaneously enhance the power generation and improve the effluent quality. (C) 2019 Elsevier Ltd. All rights reserved.

Enhance Cathodic Capacitance to Eliminate Power Overshoot in Microbial Fuel Cells

Anode Modification with Capacitive Materials for a Microbial Fuel Cell: an Increase in Transient Power or Stationary Power

Controlling the Occurrence of Power Overshoot by Adapting Microbial Fuel Cells to High Anode Potentials

Occurrence of Power Overshoot for Two-Chambered Mfc at Nearly Steady-State Operation

Power Overshoot in Two-Chambered Microbial Fuel Cell (Mfc)

Enhanced electricity generation and storage by nitrogen-doped hierarchically porous carbon modification of the capacitive bioanode in microbial fuel cells

Iron-doped cross-linked puffed carbon as capacitive anode for the enhancement of bioelectron storage capacity in microbial fuel cells

Temporal Variations of Cathode Performance in Air-Cathode Single-Chamber Microbial Fuel Cells with Different Separators

Biological capacitance studies of anodes in microbial fuel cells using electrochemical impedance spectroscopy

Improving Microbial Fuel Cell Performance Using Porous Capacitive Composite Bioanode Materials with Energy Storage Function

Performance Improvement of MFCs by Treatment of Carbon Cloth Anode with Ultrasonic or Spent Anolyte

Enhancing charge harvest from microbial fuel cells by controlling the charging and discharging frequency of capacitors.

Coupling of Anodic and Cathodic Modification for Increased Power Generation in Microbial Fuel Cells

Performance Improvement of Air-Cathode Single-Chamber Microbial Fuel Cell Using a Mesoporous Carbon Modified Anode

Enhanced Electricity Generation for Microbial Fuel Cell by Using Electrochemical Oxidation to Modify Carbon Cloth Anode

Improving power output in microbial fuel cells with free-standing CoC x /Co@CC composite anodes

Evaluation of Applied Cathode Potential to Enhance Biocathode in Microbial Fuel Cells

Electricity Generation, Energy Storage, and Microbial-Community Analysis in Microbial Fuel Cells with Multilayer Capacitive Anodes

Carbon Material Optimized Biocathode for Improving Microbial Fuel Cell Performance

Optimization and Simulation of a Carbon-Based Flow-Through Composite Anode Configuration to Enhance Power Generation and Improve Effluent Quality Simultaneously for Microbial Fuel Cells

Increased Performance of Single-Chamber Microbial Fuel Cells Using an Improved Cathode Structure