Investigation of Flow Field in the Motor with the Thrust Bearing

Xuelin TANG,Miao GUO,Shuhong LIU,Zhigang ZUO,Xiaoqin LI

DOI: https://doi.org/10.3969/j.issn.1000-3983.2017.05.001

2017-01-01

Abstract:In the present paper,Navier-Stokes equation and RNG k-ε turbulence model are adopted to investigate the flow field coupled with porous medium in the integrated motor actuated by the thrust bearing,and Ergtm equation are applied for the flow in porous media based on ANSYS simulation platform.The results show that the spiral flow form in the gap between the rotor and the porous medium,and the flowrate in the gap is 0.071％ of the flowrate in the porous medium.The axisyrnmetric vortices in the radial channel inlet of thrust beating are captured,and these vortices deflect rotation direction by the action of rotation.Strong circulation flow exists in the field of thrust bearing outer ring.Meanwhile,Taylor vortices in the gap in front of the sliding beating near inlet and behind of the sliding bearing near outlet are observed clearly.Moreover,a pair of turbulent Taylor vortices in the inlet of gap between stator and rotor is predicted successfully.According to the numerical results,the vortices are quite complex in the complicated geometry,and the corresponding dissipation is relatively high.The related geometric parameters and structure of the motor can be optimized due to the high pressure loss between the thrust bearing and the sliding bearing.