Abstract:Currently there still exist a large base of subcritical coal-fired boilers remaining in operation worldwide. Improving their thermal efficiency is critical for these units to reduce the cost of electricity and meet the increasingly stringent efficiency regulations. This paper presented an economic high temperature upgrading retrofit solution for these subcritical units in which the final superheat and reheat steam temperatures are elevated from 540 °C to 600 °C level while the steam pressures remain at subcritical such that the retrofit can be made with minimum modifications to the boiler to reduce retrofit cost and technical risk. A systematic analysis was first conducted to deduce the best boiler heating surface modification option to achieve such significant increase of boiler steam temperatures. The analysis shows that replacing part of the furnace water wall below the furnace exit with wall superheater is the most viable and economic boiler modification design. A three-dimensional computational fluid dynamics (CFD) simulation was then conducted for a typical 320 MW subcritical boiler design to verify the feasibility of this design and determine the area of furnace wall that needs to be modified to achieve the target steam temperatures. The results show that with only 3.6 m height of furnace wall replaced with wall superheater both the superheat and reheat steam temperatures can reach the target 600 °C level even without any modification made to the reheaters. With this heating surface modification design, the efficiency of the existing subcritical power plants can be improved considerably with minimum boiler retrofit work. More importantly, this technology is going to help the plant owners meet the increasingly stringent efficiency and emission regulations mandated by the government and place them in a better position to continue operating these units.

Calculation on In-furnace Heat Transfer of Large (ultra)supercritical Coal-fired Boilers

Study on coal combustion characteristics in a 350MW supercritical tangentially boiler

The Study of Unified Thermal Calculation Model of Circulating Fluidized Bed Boiler Based on Experience

Numerical analysis and modified thermodynamic calculation methods for the furnace in the 1000 MW supercritical CO2 coal-fired boiler

Heat Flux Determination Based on the Waterwall and Gas–solid Flow in a Supercritical CFB Boiler

Integrated Numerical Model for Ultra/Supercritical CFB Boilers

Thermal-hydraulic Calculation and Analysis on Evaporator System of a 660 MWe Ultra-Supercritical CFB Boiler

Computational Analysis of Tube Wall Temperature of Superheater in 1000 MW Ultra-Supercritical Boiler Based on the Inlet Thermal Deviation

Calculation of Heat Transfer in Furnace of a Circulating Fluidized Bed Boiler

Thermal–Hydraulic Calculation and Analysis on Water Wall System of a 700 MWe Ultra-Supercritical CFB Boiler

Heat Transfer in Furnace of 1 000 MW Coal-fired Unit under Different Load Conditions

Numerical Study of Supercritical Opposed Wall-Fired Boiler Furnace Temperature and High-Temperature Heating Surface Stress under Variable Load Operation

Experimental test, numerical analysis and thermal calculation modeling of hundreds kW th -class supercritical CO 2 fossil-fired boiler system

Study on Thermal Calculation Method of Circulating Fluidized Bed Boilers

Research on the Heat Transfer Model of Platen Heating Surface of 300 Mw Circulating Fluidized Bed Boilers

Numerical Simulation of Combustion Process for an 1000MW Ultra-Supercritical Boiler at Different Air Distribution Proportions

Numerical Study and Structural Optimization of Water-Wall Temperature-Measurement Device for Ultra-Supercritical Boiler

Analytical and numerical investigations on the high temperature upgrading solution of subcritical boilers

Design and Development of a 660 MW High Efficiency Ultrasupercritical Double-furnace CFB Boiler

A Comprehensive CFD Combustion Model for Supercritical CFB Boilers

Intelligent monitoring and high-performance computing method for over-temperature condition of heating surface of large coal-fired boiler in power station