Constraint method of calculating tooth bending deformation of hypoid gears in LTCA

Qi WANG,Chi ZHOU,Liangjin GUI,Zijie FAN

DOI: https://doi.org/10.13224/j.cnki.jasp.2017.11.030

2017-01-01

Abstract:Given that the bending deformation obtained from loaded tooth contact analysis (LTCA) of spiral bevel and hypoid gears contains deformations due to flexibility and shearing deformations,a constraint method of the tooth finite element model used in LTCA was proposed.This constraint method added a finite element model which fixed the nodes in the center of the tooth and the inner circle on the basis of the original constraint method.The process to obtain the normal flexibility matrix of tooth surface was also proposed.To verify the correctness of this constraint method,LTCA was conducted using this constraint method and the original one.Load contact experiment was conducted at the same time.Result showed that the constraint method mainly affected the loaded contact pattern.The loaded contact pattern obtained by the original constraint method reached the toe of the tooth under the maximum torque,while there was still 3-4mm away from the toe of the loaded contact pattern obtained by this constraint method.The loaded contact pattern obtained from this constraint method was in agreement better with the experiment.