Abstract:The centrifugal compressor is widely used for gas compression in various industrial fields such as aero-engine, gas turbine and turbocharger. However, the stable operating range is usually restricted by the occurrence of flow instability such as stall and surge. The paper experimentally examines the developing process of surge and stall occurring in a centrifugal compressor to advance the understanding on flow mechanism of flow instability. It is found that three types of pressure fluctuation can be observed at low flowrate region. At the critical point, the local stall firstly occurs in some specific diffuser passages and the enlarged local diffuser stall eventually induces the mild surge of compression system indicated by the sinusoidal pressure fluctuation. At lower mass flow rate, the diffuser stall cell begins to circumferentially propagate along the impeller rotating direction at 11% of rotor speed with the existence of mild surge. In comparative analysis of IGV pre-swirl angle on the occurrence of mild surge, the mild surge still occurs at the operating condition when the slope of the characteristic map of test stage is still obviously negative, in which the compression system is supposed to be stable in previous study. And a new suggested criterion for the prediction of mild surge is demonstrated that the occurrence of mild surge depends on the destabi-lization effect of downstream components about diffuser and volute. Combined with the experimental data, the streamwise distribution characteristic of diffuser stall can be used to develop the simplified model of lumped parameters for the analysis on the generation mechanism of the diffuser rotating stall. The quantitative investigation on the relation between the pressure-rise characteristic of subcomponents and the occurrence of mild surge and diffuser rotating stall not only advances the prediction of stability limit but also lays the theoretic foundation for controlling these unsteady behaviors to improve the operating range.

Experimental Research on Effects of Inclination Angle on Sliding-Vane Compressor Operating Characteristics

Experimental investigation of transient characteristics of mild surge and diffuser rotating stall in a centrifugal compressor with vaned diffuser

Gravity-Independent Experimental Study on a High-Speed Rotor Supported by Aerostatic Bearings

The Experimentatial Research of Effect of Inclination on Oily Working Medium Condensation Heat Transfer

An Experimental Investigation On The Clocking Effect Between Inlet Guide Vanes And Vaned Diffuser In A Centrifugal Compressor Stage

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

Study on the influence of variable inlet guide vane slot on the aerodynamic performance in air storage centrifugal compressor

A study of a low pressure ratio vapor injection scroll compressor for electric vehicles under low ambient conditions

Research on Effects of Vapor Injection on Twin-screw Compressor Performance

Theoretical and Experimental Investigation on Comparing the Efficiency of a Single-Piston Valved Linear Compressor and a Symmetrical Dual-Piston Valved Linear Compressor

Parametric optimization and analysis of thermodynamic venting system in liquid hydrogen tank under microgravity

Analysis, modeling and simulations of an innovative sliding vane rotary compressor with a rotating cylinder

Effects of Variable Diffuser Vanes on Performance of a Centrifugal Compressor with Pressure Ratio of 8.0

Experimental Study on Inducement and Development of Flow Instabilities in a Centrifugal Compressor with Different Diffuser Types

An experimental investigation of the vane clocking effects on the centrifugal compressor time-averaged performance

Investigation of the unsteady characteristic in a scroll compressor of a heat pump system for electric vehicles

Geometric model and pressurization analysis on a novel sliding vane compressor with an asymmetrical cylinder profile

NUMERICAL AND EXPERIMENTAL STUDY OF THE EFFECTS OF THE STAGGER ANGLES OF VANE DIFFUSER ON THE PERFORMANCE OF CENTRIFUGAL COMPRESSORS

INFLUENCE OF ADJUSTABLE INLET GUIDE VANES ON THE PERFORMANCE CHARACTERISTICS OF A SHROUDED CENTRIFUGAL COMPRESSOR

Theoretical and experimental investigation on the performance of screw refrigeration compressor under part-load conditions

Experiment Investigation on Secondary Flow Loss and Flow Control Mechanisms in a Variable Compressor Cascade with Penny Cavities