Abstract:The present study describes the influence of the mutual effect of damage accumulation on the stress fields at the central crack tip in the plate subjected to uniaxial tension. The objective of the study is to analyze the cracked plate experiencing uniaxial loading under creep conditions using the CAE software SIMULIA ABAQUS taking into account the damage accumulation processes near the crack tip. Computations were performed by means of the user procedure UMAT (User material), which is based on the Bailey-Norton creep power law and the Kachanov — Rabotnov damage evolution equation describing the power-law damage accumulation processes. The analysis of the obtained results showed that in the creep and elasticity zones, in computations without taking into account the damage effect, there are asymptotics of stress fields that correspond to well-known analytical solutions of fracture mechanics (Hutchinson — Rice — Rosengren asymptotics for the creep zone, the asymptotics of linear fracture mechanics corresponding to the stress dependence. inversely proportional to the square root of the distance from the tip of the crack – for the zone of elastic behavior of the material. The presence of damage in the cracked specimen affected the asymptotic behavior of the crack tip fields. It is felt that the proposed procedure could pave the way for the analytical solution of the boundary value problem and allow us to determine the structure of the asymptotic solution of the problem. The finite element analysis clearly shows that the process of damage accumulation affects the change in the asymptotic behavior of the stress field in the vicinity of the crack tip and leads to a new asymptotic distribution of the stress tensor components. The proposed procedure can pave the way to an analytical solution of the boundary value problem and allow us to determine the structure of the asymptotic solution of the problem.

Theoretical Analysis and Engineering Implications for the High Order Term Solutions of the Mode II Type Creep Crack

Higher Order Asymptotic Analysis of Crack Tip Fields under Mode II Creeping Conditions

A Unified Method to Solve Higher Order Asymptotic Crack-Tip Fields of Mode I, Mode II and Mixed Mode I/II Crack in Power-Law Creeping Solids

Characteristics and Implications of Material Mismatch on Mode II Creep Crack Tip Field: Theoretical Analysis and Numerical Investigation

Mismatch Effect on the Mode II Type Crack Tip Field in Power-Law Creeping Materials

Study on Creep Behavior and Fracture Life Prediction Method of P92 Steel Based on Finite Element Analysis

A Higher-Order Asymptotic Solution for 3d Sharp V-Notch Front Tip Fields in Creeping Solids

3D front tip fields in creeping solids under constraint effects: a higher-order asymptotic solution

Constraint modified time dependent failure assessment diagram (TDFAD) based on <i>C</i>(<i>t</i>)-<i>A</i><sub>2</sub>(<i>t</i>) theory for creep crack

Numerical Investigations on the Effects of T-Stress in Mode I Creep Crack

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

Out-of-plane Effect on the Sharp V-notch Tip Fields in Power-Law Creeping Solids: A Three-Dimensional Asymptotic Analysis

Influence of the process of damage accumulation on the asymptotic behavior of stress fields under creep conditions of a sample with a central crack

Creep Rupture Limit Analysis for Engineering Structures under High-Temperature Conditions

C(t) Dominance of the Mixed I/II Creep Crack: Part I. Transient Creep

Numerical Investigations on the Effects of T-stress in Creep Crack

Creep crack growth prediction using a damage based approach

Effects of nonproportional loading and residual stress on creep crack tip fields

FEM Solutions for Plane Stress Mode-I and Mode-Ii Cracks in Strain Gradient Plasticity

An Analytical Method for Predicting Direct Tensile Creep Fracture in Brittle Solids Containing Initial Microcracks

Unified theoretical solutions for describing the crack-tip stress fields of mode-II cracked specimens under the fully plastic condition