Photorealistic Computer-Generated Holograms Using Layer Based Processing

Hao Zhang,Liangcai Cao,Guofan Jin

DOI: https://doi.org/10.1364/dh.2017.m3b.1

2017-01-01

Abstract:A layer based algorithm with single-viewpoint rendering geometry is proposed for calculating 3D computer-generated holograms with occlusion effect. The algorithm is compatible with computer graphics pipeline, and photorealistic 3D images can be reconstructed.

What problem does this paper attempt to address?

Computer-Generated Holograms For 3d Objects Using The Fresnel Zone Plate

Xiaojie Zhang,Xü Liu,Xiaoxi Chen

DOI: https://doi.org/10.1117/12.570412

2005-01-01

Abstract:A new fast algorithm using the "host" Fresnel zone plate was proposed to improve the computational efficiency of computer-generated hologram (CGH) for 3D objects. By reading.3DS files, the spatial position information of each point of the 3D object was obtained directly. With the illumination of plane wave, the "host" Fresnel zone plate of a single point could be equal to all points located in the same depth plane - as the Fresnel zone plate was translated and superimposed along the horizontal and vertical axes. Consequently, the hologram of a 3D object could be built up by superimposing different Fresnel zone plates in the corresponding depth planes. For a digital object composed of 1060 points, it cost about 83s to generate a hologram of 1024*768 pixels. The CGH of 3D objects with the results of the reconstruction was presented in this paper, which proved the feasibility of this algorithm.
Computer-generated Hologram with Occlusion Effect Using Layer-Based Processing.

Hao Zhang,Liangcai Cao,Guofan Jin

DOI: https://doi.org/10.1364/ao.56.00f138

IF: 1.9

2017-01-01

Applied Optics

Abstract:We propose a layer-based algorithm with single-viewpoint rendering geometry to calculate a three-dimensional (3D) computer-generated hologram (CGH) with occlusion effect. The 3D scene is sliced into multiple parallel layers according to the depth information. Slab-based orthographic projection is implemented to generate shading information for each layer, which renders hidden primitives for occlusion processing. The layer-based angular spectrum with silhouette mask culling is used to calculate the wave propagations from the layers to the CGH plane without paraxial approximation. The algorithm is compatible with the computer graphics pipeline for photorealistic rendering and robust for CGHs with different parameters. Experimental results demonstrate that the proposed algorithm can reconstruct quality 3D scenes with accurate depth information, as well as the occlusion effect.
Rapid Algorithm for Computer-Generated Hologram of Three-Dimensional Object

CHEN Xiao-xi,LIU Xu,LIN Yuan-fang,XIE Xiao-yan

DOI: https://doi.org/10.3785/j.issn.1008-973x.2009.01.010

2009-01-01

Abstract:A new rapid algorithm for hologram of three-dimensional object was presented.The algorithm can rapidly generate the point hologram and the main hologram data of different depth according to the center symmetric distribution of dot hologram.The main holographic data of other depth were achieved by zooming in/out the main holographic data of the main depth.The point holographic data were generated by shifting the main holographic of the same depth.The analysis and experimental results show that the new algorithm can effectively shorten the computing time and its speed is nearly five times faster than other algorithms.
Reduction In The Reconstruction Error Of Computer-Generated Holograms In Liquid Crystal Panels

Xiaoxi Chen,Xü Liu,Xiaojie Zhang

DOI: https://doi.org/10.1117/12.575588

2005-01-01

Abstract:In this paper the research of the real-time three-dimensional holographic imaging system which uses liquid crystal panels to display the computer generated Fresnel holograms for reconstructed 3D images is described. The reconstructed effects are related to each step of the process and the characteristics of the devices. The contradictions between the quantization of holographic numerical data and the properties of the display device are the important reasons for the reconstruction errors. A new algorithm for calculating point holograms is proposed for reducing the reconstruction errors. Finally the original experimental result is given.
Reproduction of a Computer-Generated Hologram with a White Light Source and Liquid Crystal Device

Xiao-jie Zhang,Xu Liu,Hai-feng Li

DOI: https://doi.org/10.1117/1.2714982

IF: 1.3

2007-01-01

Optical Engineering

Abstract:The reproduction of computer-generated hologram (CGH) with white light source was realized using a liquid crystal panel instead of holographic film. The Burch-coding CGH was achieved by simulating the interference of a digital image and virtual reference light, displayed on liquid crystal displays and illuminated by a white light-emitting diode. The system is compact and the reconstructed images include full parallax. The full-parallax images of the Fresnel hologram computed with our algorithm were compared with the reproduced images by the rainbow hologram. The results implied this method was ready for the development of real-time three-dimensional color digital holography. (C) 2007 Society of Photo-Optical Instrumentation Engineers.
Reduction on the Reconstruction Error of Computer-generated Holography in Liquid Crystal Panels

CHEN Xiaoxi,Liu Xu,Zhang Xiaojie

DOI: https://doi.org/10.3321/j.issn:0254-3087.2004.z2.039

2004-01-01

Abstract:A new algorithm for calculating computer-generated holograms (CGH's) is proposed. The hologram fringe pattern data is stored in the computer image format, and transmitted to a transmission-type liquid crystal panel by the video signal. It will be used for the real-time three-dimension imaging by holographic reconstruction. Questions of the effect of the solution, the contrast ratio of the liquid crystal panel and the modulation due to the gray-level of the hologram image are addressed. Therefore the distribution of the amplitude and phase on the holographic plane is determinated by confirming image plane distribution considering the above effects. The reconstructed data is made as similar as possible to the source data by the optimal code. Experimental results,and value the quality of the reconstructed image are given.
Computer-generated Hologram Calculation Using Layered Stereogram Based Inverse Fresnel Diffraction

Hao Zhang,Liangcai Cao,Song Zong,Guofan Jin

DOI: https://doi.org/10.1364/dh.2016.dw5i.9

2016-01-01

Abstract:We propose an efficient algorithm using layered stereogram based inverse Fresnel diffraction for 3-D computer-generated holograms. Experiments demonstrate the proposed method can reconstruct quality 3-D images with accurate depth cues.
Full Parallax Three-Dimensional Display with Occlusion Effect Using Computer Generated Hologram

Hao Zhang,Neil Collings,Jing Chen,Bill Crossland,Daping Chu,Jinghui Xie

DOI: https://doi.org/10.1117/1.3599871

IF: 1.3

2011-01-01

Optical Engineering

Abstract:Computational holography becomes highly complicated and demanding when it is employed to produce real three-dimensional (3D) images. Here we present a novel algorithm for generating a full parallax 3D computer generated hologram (CGH) with occlusion effect, which is an important property of 3D perception, but has often been neglected in most CGH related works. The ray casting technique is introduced to handle the occlusion issue. Horizontally and vertically distributed rays are projected from each hologram sample to the 3D objects to obtain the complex amplitude distribution. The proposed algorithm has no restriction on-or approximation to-the 3D objects, and it can produce reconstructed images with correct shading effect and no visible artifacts. An optical experiment is performed to validate our approach, using a phase-only spatial light modulator to optically reconstruct a 3D scene. The experimental result confirmed that the CGHs produced by our algorithm can successfully reconstruct 3D images with full parallax and occlusion effect. (C) 2011 Society of Photo-Optical Instrumentation Engineers (SPIE). [DOI: 10.1117/1.3599871]
Layer-oriented Computer-Generated Holograms for Three-Dimensional Display

Liangcai Cao,Yan Zhao,Hao Zhang,Song Zong,Dezhao Kong,Guofan Jin

DOI: https://doi.org/10.1117/12.2238820

2016-01-01

Abstract:Depth cues and full-parallax are crucial issues in the calculation of computer-generated holograms (CGHs) for perfect holographic three-dimensional (3-D) display. In order to accelerate the speed of generating CGHs and improve the display quality, three layer-oriented methods are investigated in this paper. The first method is based on angular-spectrum, which can provide accurate depth cues. The second method is based on inverse Fresnel diffraction layered holographic stereogram to provide accurate depth information as well as correct occlusion effect. The third method is proposed to generate zoomable 3-D CGHs using layer-based shifted Fresnel diffraction. Numerical simulations and optical experiments have demonstrated that the proposed methods can reconstruct quality 3-D images.
Full Parallax Three-Dimensional Computer Generated Hologram with Occlusion Effect Using Ray Casting Technique

Hao Zhang,Qiaofeng Tan,Guofan Jin

DOI: https://doi.org/10.1088/1742-6596/415/1/012048

2013-01-01

Journal of Physics Conference Series

Abstract:Holographic display is capable of reconstructing the whole optical wave field of a three-dimensional (3D) scene. It is the only one among all the 3D display techniques that can produce all the depth cues. With the development of computing technology and spatial light modulators, computer generated holograms (CGHs) can now be used to produce dynamic 3D images of synthetic objects. Computation holography becomes highly complicated and demanding when it is employed to produce real 3D images. Here we present a novel algorithm for generating a full parallax 3D CGH with occlusion effect, which is an important property of 3D perception, but has often been neglected in fully computed hologram synthesis. The ray casting technique, which is widely used in computer graphics, is introduced to handle the occlusion issue of CGH computation. Horizontally and vertically distributed rays are projected from each hologram sample to the 3D objects to obtain the complex amplitude distribution. The occlusion issue is handled by performing ray casting calculations to all the hologram samples. The proposed algorithm has no restriction on or approximation to the 3D objects, and hence it can produce reconstructed images with correct shading effect and no visible artifacts. Programmable graphics processing unit (GPU) is used to perform parallel calculation. This is made possible because each hologram sample belongs to an independent operation. To demonstrate the performance of our proposed algorithm, an optical experiment is performed to reconstruct the 3D scene by using a phase-only spatial light modulator. We can easily perceive the accommodation cue by focusing our eyes on different depths of the scene and the motion parallax cue with occlusion effect by moving our eyes around. The experiment result confirms that the CGHs produced by our algorithm can successfully reconstruct 3D images with all the depth cues.
Computer-generated holographic near-eye display system based on LCoS phase only modulator

Peng Sun,Shengqian Chang,Siman Zhang,Ting Xie,Huaye Li,Siqi Liu,Chang Wang,Xiao Tao,Zhenrong Zheng

DOI: https://doi.org/10.1117/12.2271730

2017-01-01

Abstract:Augmented reality (AR) technology has been applied in various areas, such as large-scale manufacturing, national defense, healthcare, movie and mass media and so on. An important way to realize AR display is using computer-generated hologram (CGH), which is accompanied by low image quality and heavy computing defects. Meanwhile, the diffraction of Liquid Crystal on Silicon (LCoS) has a negative effect on image quality. In this paper, a modified algorithm based on traditional Gerchberg-Saxton (GS) algorithm was proposed to improve the image quality, and new method to establish experimental system was used to broaden field of view (FOV). In the experiment, undesired zero-order diffracted light was eliminated and high definition 2D image was acquired with FOV broadened to 36.1 degree. We have also done some pilot research in 3D reconstruction with tomography algorithm based on Fresnel diffraction. With the same experimental system, experimental results demonstrate the feasibility of 3D reconstruction. These modifications are effective and efficient, and may provide a better solution in AR realization.
Three-dimensional Computer-Generated Hologram with Fourier Domain Segmentation

Hao Zhang,Liangcai Cao,Guofan Jin

DOI: https://doi.org/10.1364/oe.27.011689

IF: 3.8

2019-01-01

Optics Express

Abstract:We propose an efficient algorithm for calculating photorealistic three-dimensional (3D) computer-generated hologram with Fourier domain segmentation. The segmentation of the spatial frequency processes the depth information from multiple parallel projections, recombining the wave fields of different viewing directions in the Fourier domain. Segmented angular spectrum with layer based processing is introduced to calculate the partitioned elements, which effectively extends the limited region of conventional angular spectrum. The algorithm can provide accurate depth cues and is compatible with computer graphics rendering techniques to provide quality view-dependent properties. Experiments demonstrate the proposed method can reconstruct photorealistic 3D images with accurate depth information.
Layered Holographic Stereogram Based on Inverse Fresnel Diffraction

Hao Zhang,Yan Zhao,Liangcai Cao,Guofan Jin

DOI: https://doi.org/10.1364/ao.55.00a154

IF: 1.9

2016-01-01

Applied Optics

Abstract:We propose an efficient algorithm using layered holographic stereogram for three-dimensional (3D) computer-generated holograms. The hologram is spatially partitioned into multiple holographic elements (hogels) to provide the occlusion effect and motion parallax by use of multiple viewpoint rendering. Each hogel is calculated with inverse Fresnel diffraction by slicing the viewing frustum according to the depth image. The sliced layers can provide accurate depth cues for reconstruction since the geometric information of the 3D scene is faithfully matched. The algorithm is compatible with computer graphics rendering techniques and robust for holograms with different parameters. When the hogel size equals 1 mm, the signal-to-noise ratio of the diffraction calculation is above 39 dB with a propagation distance longer than 10 mm. Numerical simulations and optical experiments have demonstrated that the proposed method can reconstruct quality 3D images with reduced computational load. (C) 2016 Optical Society of America
3-D Computer-Generated Hologram with Fourier Plane Segmentation

Hao Zhang,Liangcai Cao,Guofan Jin

DOI: https://doi.org/10.1364/dh.2018.dtu5f.4

2018-01-01

Abstract:3-D computer-generated hologram (CGH) is calculated by Fourier plane segmentation with shading and geometric information from multiple parallel projections. The algorithm can reconstruct photorealistic 3-D images with accurate depth information.
Holographic near-eye display system based on double-convergence light Gerchberg-Saxton algorithm.

Peng Sun,Shengqian Chang,Siqi Liu,Xiao Tao,Chang Wang,Zhenrong Zheng

DOI: https://doi.org/10.1364/OE.26.010140

IF: 3.8

2018-01-01

Optics Express

Abstract:In this paper. a method is proposed to implement noises reduced three-dimensional (3D) holographic near-eye display by phase-only computer-generated hologram (CGH). The CGH is calculated from a double-convergence light Gerchberg-Saxton (GS) algorithm, in which the phases of two virtual convergence lights are introduced into GS algorithm simultaneously. The first phase of convergence light is a replacement of random phase as the iterative initial value and the second phase of convergence light will modulate the phase distribution calculated by GS algorithm. Both simulations and experiments are carried out to verify the feasibility of the proposed method. The results indicate that this method can effectively reduce the noises in the reconstruction. Field of view (FOV) of the reconstructed image reaches 40 degrees and experimental light path in the 4-f system is shortened. As for 3D experiments, the results demonstrate that the proposed algorithm can present 3D images with 180cm zooming range and continuous depth cues. This method may provide a promising solution in future 3D augmented reality (AR) realization. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
Three Dimensional Computer-Generated Holograms with Shading Effects Based on A Phase-Only Spatial Light Modulator

Hao Zhang,Yan Zhao,Liangcai Cao,Guofan Jin

DOI: https://doi.org/10.1117/12.2034978

2013-01-01

Abstract:Computer holography is a highly complicated and demanding task when it comes to producing realistic three-dimensional (3D) display. We present a calculation algorithm for generating 3D computer-generated holograms (CGHs) which can produce multiple shading effects. Computer graphics rendering technique is introduced in the CGH computing, which determines the reflectance distributions of the object surface according to the lighting model. The CGHs are then generated using point source method and the intensities of the sampling points are determined by the reflectance properties. The ambient, diffuse and specular reflections are included in the calculation to produce realistic shading effects of the 3D scene. A phase-only spatial light modulator (SLM) is used to perform the optical reconstruction and the experimental results show that our proposed method can reconstruct 3D CGHs with multiple shading effects successfully.
Calculation For High-Resolution Computer-Generated Hologram With Fully-Computed Holographic Stereogram

Hao Zhang,Yan Zhao,Zheng Wang,Liangcai Cao,Guofan Jin

DOI: https://doi.org/10.1117/12.2071617

2014-01-01

Abstract:A high-resolution full-parallax computer-generated hologram (CGH) is created to reconstruct a photorealistic three-dimensional (3D) scene. Fully-computed holographic stereogram is introduced to generate the CGH, which integrates physically based method and holographic stereogram based method to produce accurate depth information as well as view-dependent effects. Accurate accommodation cue and occlusion effect can be created, and computer graphics rendering techniques can be employed in the CGH generation to enhance the image fidelity. A high-resolution hologram with 400 million pixels is fabricated by a lithography system, and the viewing angle is above 30 degrees during optical reconstruction.
Fast Computer-Generated Hologram Generation Method for Three-Dimensional Point Cloud Model

Ping Su,Wenbo Cao,Jianshe Ma,Bingchao Cheng,Xianting Liang,Liangcai Cao,Guofan Jin

DOI: https://doi.org/10.1109/jdt.2016.2553440

2016-01-01

Journal of Display Technology

Abstract:A fast computer-generated hologram (CGH) generation method for three-dimensional point cloud models is proposed. The points of the model are classified into parallel two-dimensional layers after a layer spacing dz is set. Then, the CGH can be calculated by a layer-based method. In addition, a simple approach for occlusion culling is introduced. The computation time is reduced by thousands of times compared to point-based method. Discussion results show that the proposed method is more effective for larger models, and for models with huge number of points, the computation efficiency can be further enhanced by choosing larger layer spacing and optimized classification method. The proposed method will be an ideal CGH generation method for point cloud models, extremely suitable for real-time holographic reconstruction of the real scene.
Calculation for Computer-Generated Holograms Using Fully Computed Holographic Stereogram Based Method

Hao Zhang,Yan Zhao,Liangcai Cao,Guofan Jin

DOI: https://doi.org/10.1364/dh.2015.dm4a.4

2015-01-01

Abstract:An algorithm for calculating computer-generated holograms with accurate depth information is proposed based on fully computed holographic stereogram, which could perform quality reconstructions of 3D scenes with arbitrary depth information.
Accurate Calculation of Computer-Generated Holograms Using Angular-Spectrum Layer-Oriented Method.

Yan Zhao,Liangcai Cao,Hao Zhang,Dezhao Kong,Guofan Jin

DOI: https://doi.org/10.1364/oe.23.025440

IF: 3.8

2015-01-01

Optics Express

Abstract:Fast calculation and correct depth cue are crucial issues in the calculation of computer-generated hologram (CGH) for high quality three-dimensional (3-D) display. An angular-spectrum based algorithm for layer-oriented CGH is proposed. Angular spectra from each layer are synthesized as a layer-corresponded sub-hologram based on the fast Fourier transform without paraxial approximation. The proposed method can avoid the huge computational cost of the point-oriented method and yield accurate predictions of the whole diffracted field compared with other layer-oriented methods. CGHs of versatile formats of 3-D digital scenes, including computed tomography and 3-D digital models, are demonstrated with precise depth performance and advanced image quality.

Photorealistic Computer-Generated Holograms Using Layer Based Processing

Computer-Generated Holograms For 3d Objects Using The Fresnel Zone Plate

Computer-generated Hologram with Occlusion Effect Using Layer-Based Processing.

Rapid Algorithm for Computer-Generated Hologram of Three-Dimensional Object

Reduction In The Reconstruction Error Of Computer-Generated Holograms In Liquid Crystal Panels

Reproduction of a Computer-Generated Hologram with a White Light Source and Liquid Crystal Device

Reduction on the Reconstruction Error of Computer-generated Holography in Liquid Crystal Panels

Computer-generated Hologram Calculation Using Layered Stereogram Based Inverse Fresnel Diffraction

Full Parallax Three-Dimensional Display with Occlusion Effect Using Computer Generated Hologram

Layer-oriented Computer-Generated Holograms for Three-Dimensional Display

Full Parallax Three-Dimensional Computer Generated Hologram with Occlusion Effect Using Ray Casting Technique

Computer-generated holographic near-eye display system based on LCoS phase only modulator

Three-dimensional Computer-Generated Hologram with Fourier Domain Segmentation

Layered Holographic Stereogram Based on Inverse Fresnel Diffraction

3-D Computer-Generated Hologram with Fourier Plane Segmentation

Holographic near-eye display system based on double-convergence light Gerchberg-Saxton algorithm.

Three Dimensional Computer-Generated Holograms with Shading Effects Based on A Phase-Only Spatial Light Modulator

Calculation For High-Resolution Computer-Generated Hologram With Fully-Computed Holographic Stereogram

Fast Computer-Generated Hologram Generation Method for Three-Dimensional Point Cloud Model

Calculation for Computer-Generated Holograms Using Fully Computed Holographic Stereogram Based Method

Accurate Calculation of Computer-Generated Holograms Using Angular-Spectrum Layer-Oriented Method.