Abstract:We developed a 3D end-effector type of upper limb assistive robot, named as Assistive Robotic Arm Extender (ARAE), that provides transparency movement and adaptive arm support control to achieve home-based therapy and training in the real environment. The proposed system composes five degrees of freedom, including three active motors and two passive joints at the end-effector module. The core structure of the system is based on a parallel mechanism. The kinematic and dynamic modeling are illustrated in detail. The proposed adaptive arm support control framework calculates the compensated force based on the estimated human arm posture in 3D space. It firstly estimates human arm joint angles using two proposed methods: fixed torso and sagittal plane models without using external sensors such as IMUs, magnetic sensors, or depth cameras. The experiments were carried out to evaluate the performance of the two proposed angle estimation methods. Then, the estimated human joint angles were input into the human upper limb dynamics model to derive the required support force generated by the robot. The muscular activities were measured to evaluate the effects of the proposed framework. The obvious reduction of muscular activities was exhibited when participants were tested with the ARAE under an adaptive arm gravity compensation control framework. The overall results suggest that the ARAE system, when combined with the proposed control framework, has the potential to offer adaptive arm support. This integration could enable effective training with Activities of Daily Living (ADLs) and interaction with real environments.

Optimized Design of an RSSR Mechanism for an Unpowered Assistive Aid

Design Paradigm for Human Size Manipulator with High Payload, Repeatability, and Bandwidth

Design and Analysis of Folding Mechanism for Intelligent Wheelchair-Stretcher Robot

Modeling and Analysis of Spatial RSSP Constant-Force Mechanism with Compliant Joints

Design and analysis of feeder mechanism for buckling prevention in robotic catheterization

Analysis, Design, and Experimental Research of a Novel Wheelchair-Stretcher Assistive Robot

RSSR Mechanism Design and Motion Control Strategy of a Carbon-Free Vehicle for Obstacle Avoidance Competition

Design and Evaluation of a Compact 3D End-effector Assistive Robot for Adaptive Arm Support

Modeling and design of a reconfigurable novel constant-force mechanism for assistive exoskeletons

Design and analysis of a novel 3T1R four-degree-of-freedom parallel mechanism with infinite rotation capability

Design of an Efficient Non-backdrivable Mechanism with Wrap Spring for Hand Prosthesis

Optimization of the Rotational Asymmetric Parallel Mechanism for Hip Rehabilitation With Force Transmission Factors

Motion Generation of Planar Six- and Eight-Bar Slider Mechanisms As Constrained Robotic Systems

Design and control of a sit-to-stand assistive device based on analysis of kinematics and dynamics

Conceptual design and dimensional synthesis of a novel parallel mechanism for lower-limb rehabilitation

Design and evaluation of a symmetric amplification mechanism based anthropomorphic shoulder

Mechanism Analysis and Optimization Design of Exoskeleton Robot with Non-Circular Gear–Pentabar Mechanism

Force/motion Transmissibility Analysis and Parameters Optimization of Hybrid Mechanisms with Prescribed Workspace

2PPaRR-2PPaRU: Design, analysis, and optimization of a new 3T1R parallel manipulator with rotational pitch motion

Design And Modeling Of A Torsion Spring-Based Actuator (Tsa) With Valid Straight-Arm Length Adjustable For Stiffness Regulation

Design, Modelling, and Control of a Reconfigurable Rotary Series Elastic Actuator with Nonlinear Stiffness for Assistive Robots