Abstract:The content of C element and in-situ Ti2AlC phase is adjusted to reduce the content of B2 phase in the TiAl matrix, ultimately improving the compressive properties of TiAl alloys. Results show that there is a high content of B2 phase inside the lamellar colony, and the Nb content in the B2 phase is higher than that dissolved in matrix. The addition of C element results in the formation of a round rod like reinforcing phase and refining the lamellar colony. As the C content increases from 0 to 3.0 at. %, the content of in-situ Ti2AlC reinforcing phase increases from 0 to 17.8 vol. %, the content of B2 phase decreases from 10.4 to 1.4 vol. %, and the size of the lamellar colony decreases from 161.3 to 19.5 μm. The decrease in the content of B2 phase is due to the preferential formation of Ti2AlC reinforcing phase in the liquid, Nb will preferentially dissolve in it, resulting in a more uniform distribution of Nb in the solidified structure and reducing the segregation of Nb. Then, Ti2AlC particles act as heterogeneous nucleation, increasing the nucleation sites in the alloy melt and refining the microstructure. According to the results of the compression test, as the C content increases from 0 to 2.5 at. %, the compressive strength increases from 1186.9 to 2154.5 MPa, and the compressive strain increases from 6.5 to 20.2 %. Therefore, the precipitation strengthening effect of Ti2AlC, the grain boundary strengthening effect of refined microstructure, and the decrease in the content of B2 phase jointly contribute to the improvement of the compressive properties at room temperature.

Improvement of microstructure and mechanical properties of TiAl?Nb alloy by adding Fe element

Improving Microstructure and Mechanical Properties of Ti43Al5Nb0.1B Alloy by Addition of Fe

Effects of Fe on Microstructures and High-Temperature Compressive Mechanical Properties of Nb-16Si-22Ti-2Cr-2Al-2Hf Based Alloy

Effect of Fe Content on Microstructure Evolution and Mechanical Properties of as-cast Ti-xFe-B Alloy

Effect of Ti and Al Interaction on Microstructures and Mechanical Properties of the Nb-Ti-Si-Al Alloys

Influence of Ti addition on microstructure and mechanical behavior of a FCC-based Fe30Ni30Co30Mn10 alloy

Effect of Fe additions on microstructure and mechanical properties of a multi-component Nb–16Si–22Ti–2Hf–2Al–2Cr alloy at room and high temperatures

Effects of Titanium Addition on the Microstructural and Mechanical Property Evolution of FeCrB Alloys

Improved Fracture Toughness by Microalloying of Fe in Ti-6Al-4V

Microstructure Evolution and Mechanical Properties of New Ti-Al-Fe-B Titanium Alloy with High Strength and Ductility

Microstructure and mechanical properties of powder metallurgy Ti-TiBw-xFe titanium matrix composites using Ti-TiBw composite powder

Improving densification and mechanical properties of FeAl/TiC composites by addition of Ni

Microstructure Evolution and Grain Refinement Behavior During Hot Deformation of Fe Micro-Alloyed Ti-6Al-4V

The Effect of Different C Contents on the Microstructure Evolution and Mechanical Properties of Ti45Al6Nb Alloy

Effect of Fe and Mo Additions on Microstructure and Mechanical Properties of Tial Intermetallics

Effect of Al addition on properties of TiNiFe shape memory alloys

Effects of Fe, Co and Ni Elements on the Ductility of TiAl Alloy

Microstructure and mechanical properties of Al2O 3/TiAl in situ composites doped with Fe2O3

Effect of Fe Content on Microstructures and Properties of Ti6Al4V Alloy with Combinatorial Approach

Characterization of TiAl-based alloy with high-content Nb by powder metallurgy

Effect of Fe Ternary Addition on Ductility of Nial Intermetallic Alloy