Abstract:In this research, the microstructure and micro mechanical property of linear friction welded joint for heteromorphic TC17 titanium alloy were investigated by nanoindentation testing and electron backscatter diffraction technique. The results show that the special microstructure in the weld zone (WZ) of the joint has great effects on its micro mechanical property. The WZ is composed of the transformed β phase, which exists in the form of equiaxed substructure, and the microstructure of the WZ can be divided into two parts along the centerline of the weld based on its main orientation. The WZ of the TC17 (α + β) side has the main orientation and , while the TC17 (β) side has the main orientation . Meanwhile, more high angle grain boundaries (HAGB) are found in the WZ of the TC17 (α + β) side. These microstructure characteristics have a significant impact on the micro mechanical property of the WZ. Due to more HAGB are in the WZ of the TC17 (α + β) side than the TC17 (β) side, the interface strengthening effect is a slightly stronger in the TC17 (α + β) side, which leads to better elastic modulus, hardness, and fracture toughness. While the TC17 (α + β) side microstructure has the and slip modes that are easier activated under RD direction force, so the microstructure in the WZ of the TC17 (α + β) side has a smaller yield strength and a larger hardening exponent than that in the WZ of the TC17 (β) side. In addition, it was also found that the area in the edge of the WZ near thermo-mechanically affected zone of the TC17 (α + β) side (TC17 (α + β)-TMAZ) has the minimum micro mechanical property and is the weak area of the WZ, which is related to the lower degree of recrystallization compared to other areas of the WZ. This area has the smallest elastic modulus (146.4 MPa), hardness (3.4 GPa), yield strength (904 MPa), and fracture toughness (0.173 MPa*m1/2), while the hardening exponent is 0.107. The macro tensile fracture location also matches the weak area in the WZ of the joints. Besides, it was also found that the average yield strength and tensile strength of the joint are 1016 MPa and 1065 MPa, while the elastic modulus and elongation are 111.2 GPa and 2.1%. And the microhardness distribution of the joint presents a "w" shape, which is due to lower phase α/β interface content in the WZ of the LFW joint for heteromorphic TC17 alloy and leads to the minimum mechanical property.

Relationships Between Microhardness, Microstructure, and Grain Orientation in Laser-Welded Joints with Different Welding Speeds for Ti6Al4V Titanium Alloy

Microstructure and Mechanical Properties of Laser Welded Lap Joints of Ti-6Al-4V Alloy

Microstructure, Thermal Behavior and Tensile Properties of Laser Welded Bottom-Locking Joint for TA15 Titanium Alloy

Microstructural Characteristics and Mechanical Properties in Laser Beam Welds of Ti6al4v Alloy

Microstructure and Mechanical Properties of Welded Joints of Titanium Alloy Ti60 after Laser Welding and Subsequent Heat Treatment

In-situ Investigation on Mechanical Behavior of Laser-Welded Joint for TC4 Titanium Alloy

Microstructure, Variant Selection, and Mechanical Properties of Laser-Welded Ti-4Al-2V Joints

Microstructure and Mechanical Properties of Pulsed Laser Beam Welded Ti-2al-1.5mn Titanium Alloy Joints

Tailoring Weldability for Microstructures in Laser-Welded Near-α Titanium Alloy: Insights on Mechanical Properties

Microstructure and Mechanical Properties of Laser Welded TC4 Alloys

Microstructural Characteristics and Mechanical Properties in the Laser Beam Welded Joints of High-Strength Microalloyed Steel

Effects of Weld Cross-Section Profiles and Microstructure on Properties of Pulsed Nd:Yag Laser Welding of Ti6al4v Sheet

Effect of grain orientation on microstructure and mechanical properties of laser welded joint of additive manufactured 300M steel

Microstructure and Impact Toughness of Laser-Arc Hybrid Welded Joint of Medium-Thick TC4 Titanium Alloy

Microstructure and Mechanical Properties of Arc Zone and Laser Zone of TC4 Titanium Alloy Laser–TIG Hybrid Welded Joint

Unraveling Microstructure Characteristics Induced Mechanical Responses in Laser Welding of Titanium Alloy Subjected to Varied Inclination Angle

Effect of Heat Input on the Microstructures and Mechanical Properties of Laser Welded Ti2AlNb Alloys

Microstructure and mechanical properties of 1mm thin plate TC4 titanium alloy joint by ring laser welding

Microstructure and Properties of 6063/ti3al2.5v Dissimilar Alloys Joint with Laser Welding

Effect of Laser Heat Input on Microstructure and Fatigue Behavior of TC17 Titanium Alloy Laser Welded Joint

Effects of microstrcture composition and orientation on micro mechanical properties of linear friction welding joint weld zone for heteromorphic TC17 titanium alloy