Abstract:With the development of lightweight aerospace structures, the use of the high-quality and efficient laser welding of near-α titanium alloys has received widespread attention and favor thanks to its superior comprehensive performance. The welding experiment of 3 mm thick TA15 titanium alloy was carried out by YAG laser welding, and the material weldability, microstructure, microhardness, and mechanical properties of welded joints were systematically studied. The results indicated that laser welding of TA15 titanium alloy can produce well-formed welded joints without defects such as cracks and porosity. The welded metal used was a typical basket-weave microstructure composed of a large number of α′ martensitic phases and a small number of high-temperature residual β phases, and the heat-affected zone was a staggered arrangement of undissolved α phase and needle-like α′ martensite. The microhardness of the welded joint showed a hump distribution, and the hardness of WM fluctuated between 410 and 450 HV since the martensitic transformation occurred during the solidification of the weld under thermal cycling, and the β phase changed to the needle-like α′ phase. The tensile test indicated that the fracture position was located in the base metal area, and the fracture morphology showed the equiaxial dimple morphology of different sizes in a ductile fracture mode. The welded metal had the lowest impact performance (average value of 5.3 J) because the weld area was predominantly coarse α′ martensite. This experiment conducted systematic, in-depth, and extensive research on welding processes, hardness, tensile, impact, and fracture mechanisms. Based on the special product applications in the aerospace field, it was more targeted and conducive to promoting the application of the welding process in this material.

Microstructure, Thermal Behavior and Tensile Properties of Laser Welded Bottom-Locking Joint for TA15 Titanium Alloy

Microstructure and High-Temperature Tensile Properties of Ti3Al Alloys Laser Welding Joint

Tailoring Weldability for Microstructures in Laser-Welded Near-α Titanium Alloy: Insights on Mechanical Properties

In-situ Investigation on Mechanical Behavior of Laser-Welded Joint for TC4 Titanium Alloy

Microstructures and Mechanical Properties of Ti–24Al–17Nb (at.%) Laser Beam Welding Joints

Relationships Between Microhardness, Microstructure, and Grain Orientation in Laser-Welded Joints with Different Welding Speeds for Ti6Al4V Titanium Alloy

Effect of Laser Heat Input on Microstructure and Fatigue Behavior of TC17 Titanium Alloy Laser Welded Joint

Effect of Heat Input on the Microstructures and Mechanical Properties of Laser Welded Ti2AlNb Alloys

Microstructure and Mechanical Properties of Laser Welded TC4 Alloys

Microstructure Characteristics and Mechanical Properties of Laser-Tig Hybrid Welded Dissimilar Joints of Ti–22Al–27Nb and TA15

Microstructure Evolution and Mechanical Properties of TA15/Ti60 Tailor Welded Blank by Electron Beam Welding

Microstructure and Mechanical Properties at Elevated Temperature of Laser-Welded Ti–22Al–25Nb Alloy Sheets

Microstructure and Mechanical Properties of Welded Joints of Titanium Alloy Ti60 after Laser Welding and Subsequent Heat Treatment

Influence of High-Temperature Annealing on Microstructure and Properties of Welded Joints Using Narrow Gap Laser Welding of TC4 Titanium with Welding Wire

Microstructure and Tensile Property of the Joint of Laser-MIG Hybrid Welded Thick-Section TC4 Alloy

Microstructure Evolution and Tensile Properties of Laser-TIG Hybrid Welds of Ti 2 AlNb-Based Titanium Aluminide

Study on laser welding of a Ti-22Al-25Nb alloy: Microstructural evolution and high temperature brittle behavior

Microstructure and mechanical properties of 1mm thin plate TC4 titanium alloy joint by ring laser welding

Effect of welding heat input on microstructure and properties of TC4 titanium alloy ultra-narrow gap welded joint by laser welding with filler wire

Microstructure and Mechanical Properties of Pulsed Laser Beam Welded Ti-2al-1.5mn Titanium Alloy Joints

Microstructure and mechanical properties of submerged arc welded TA15 titanium alloy joints