Abstract:The effect of deposit thickness on the microstructure and the mechanical properties of Inconel 718 (IN718) fabricated by directed energy deposition was systematically investigated in both as-deposited (AD) and homogenization + solution + aging (HSA) treated conditions. Results indicate that deposit thickness for thin parts has a more significant impact on the microstructure and subsequent room (RT) and elevated temperature (650 °C) tensile properties compared to thick parts. Applying HSA treatment can effectively homogenize the microstructure of thick builds with a microstructure transition from columnar-dendritic grain structure presented in the AD condition to recrystallized equiaxted grain structure, which results in almost similar yield strength, ultimate tensile strength and ductility of ~ 970 MPa, ~ 1237 MPa, ~ 20% at RT and ~ 816 MPa, ~ 954 MPa, ~ 12% at 650 °C, respectively. In contrast, thin parts maintaining columnar grain features during HSA treatment yield a higher yield strength of 1112 MPa (increased by 15%) at RT and 936 MPa (increased by 15%) at 650 °C, but much lower ductility of 9% (decreased by 54%) at RT and 6% MPa (decreased by 51%) at 650 °C. The remaining large amount of residual stress primarily contribute to the enhancement of yield strength, as well as large amount of δ phase responsible for the much worse ductility for thin parts after HSA treatment. In addition, the underlying thermal history evolution in various deposit thickness is elucidated by the thermal simulations with the use of Finite Element Method (FEM) method within 3DExperience software. The results present in the current study show the capability of the directed energy deposition process to manufacture homogeneous components with varying thickness for high temperature application after a proper heat treatment, with regard to their initial as-deposited materials.

Microstructural Evolution and Mechanical Properties of Inconel 625 Alloy During Pulsed Plasma Arc Deposition Process

Microstructural evolution and mechanical properties of Inconel 625 superalloy fabricated by pulsed microplasma rapid additive manufacturing

Influence of pulsed laser scanning patterns on microstructural evolution and mechanical properties of Inconel 718 in direct laser deposition

Investigation of Microstructure and Mechanical Performance of IN738LC Superalloy Thin Wall Produced by Pulsed Plasma Arc Additive Manufacturing

Microstructural evolution and anisotropic mechanical properties of Inconel 625 superalloy fabricated by directed energy deposition

In situ interlayer hot forging arc-based directed energy deposition of Inconel® 625: process development and microstructure effects

The effect of interval pulsed laser deposition on the microstructure and mechanical properties of Inconel 718 parts using laser directed energy deposition

Effect of heat treatment on microstructure, precipitation behavior and mechanical properties of Inconel 718 fabricated by laser direct energy deposition

Mechanical properties and microstructure evolution of selective laser melting Inconel 718 along building direction and sectional dimension

The microstructural evolution and mechanical response of laser direct energy deposition Inconel 718 alloy based on simulation and experimental methods

Elucidating friction properties and strengthening mechanisms of Ni-based surfacing layer containing 9R phase

Effect of Welding Torch Mode on Heat Input, Microstructure, and Mechanical Performance of Inconel 625 via Wire‐Arc‐Directed Energy Deposition

Effect of Layer Thickness and Heat Treatment on Microstructure and Mechanical Properties of Alloy 625 Manufactured by Electron Beam Powder Bed Fusion

Comparison of microstructure features and mechanical properties for additive manufactured and wrought nickel alloys 625

Study of Phase Evolution Behavior of Ti6Al4V/Inconel 718 by Pulsed Laser Melting Deposition

Effect of electropulsing-assisted ultrasonic nanocrystal surface modification on microstructures and hardness of additive manufactured Inconel 718

A Review on Laser Powder Bed Fusion of Inconel 625 Nickel-Based Alloy

Effect of deposit thickness on microstructure and mechanical properties at ambient and elevated temperatures for Inconel 718 superalloy fabricated by directed energy deposition

Formability, Microstructure and Properties of Inconel 718 Superalloy Fabricated by Selective Laser Melting Additive Manufacture Technology

Mechanical Characterization of Near-Isotropic Inconel 718 Fabricated by Laser Powder-Bed Fusion

Research on microstructure and mechanical properties of hybrid plasma arc and micro-rolling additive manufacturing of Inconel 718 superalloy